Hello to all people in the NG, i have a problem with a usb controller:
when i plug the quickcam, the usb system detect it and assign it a
number.., but the quickcam don't accept it (it return a -110 exit
code..) and making this, it won't be listed nowhere
(/proc/bus/usb...,etc..)
I use mandrake 8.2 kernel (2.4.18), that comes already with mod_quickcam..
The controller is a pci card (Opti...)
is there any solution?? Probably is a controller problem, maybe the Opti
chipset not fully supported?
My computer:
Mainboard TX pro with an amd k6 233mhz
Linux 2.4.18-6mdk (Mandrake 8.2)
PCI USB Controller (Trust PCI USB card) --> not integrated in the
mainboard...
Webcam: Logitech quickcam express (buyed on 28/02/2001, i don't know the
serial no. ...)
dmesg output (usb):
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc28d4000, IRQ 11
usb-ohci.c: usb-00:06.0, OPTi Inc. 82C861
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device not accepting new address=3 (error=-110)
/proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c28d4000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
/proc/bus/usb/drivers:
usbdevfs
hub
------------------------
FlagZ
------------------------
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
