There are some suggestions in the FAQ about this message. See http://www.linux-usb.org/.
On Wed, 2 Oct 2002, Federico wrote: > Hello to all people in the NG, i have a problem with a usb controller: > when i plug the quickcam, the usb system detect it and assign it a > number.., but the quickcam don't accept it (it return a -110 exit > code..) and making this, it won't be listed nowhere > (/proc/bus/usb...,etc..) > > I use mandrake 8.2 kernel (2.4.18), that comes already with mod_quickcam.. > > The controller is a pci card (Opti...) > > is there any solution?? Probably is a controller problem, maybe the Opti > chipset not fully supported? > > > > My computer: > Mainboard TX pro with an amd k6 233mhz > Linux 2.4.18-6mdk (Mandrake 8.2) > PCI USB Controller (Trust PCI USB card) --> not integrated in the > mainboard... > Webcam: Logitech quickcam express (buyed on 28/02/2001, i don't know the > serial no. ...) > > dmesg output (usb): > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-ohci.c: USB OHCI at membase 0xc28d4000, IRQ 11 > usb-ohci.c: usb-00:06.0, OPTi Inc. 82C861 > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > hub.c: USB new device connect on bus1/2, assigned device number 2 > usb.c: USB device not accepting new address=2 (error=-110) > hub.c: USB new device connect on bus1/2, assigned device number 3 > usb.c: USB device not accepting new address=3 (error=-110) > > /proc/bus/usb/devices: > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=c28d4000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > /proc/bus/usb/drivers: > usbdevfs > hub > > > > > ------------------------ > FlagZ > ------------------------ > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
