Hi, I've been trying to get my Optio 430RS to work under Linux with no success. Long & short, the device is recognized but is not bound to a scsi device. I'm running RH 8.0 (kernel 2.4.18). This appears to be a problem for others as well (http://www.qbik.ch/usb/devices/ - search for Pentax). Some more info:
/proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=1060 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0a17 ProdID=0004 Rev=10.00 S: Manufacturer=ASAHI PENTAX S: Product=PENTAX OPTIO 430RS C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=05 Prot=01 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms <http://www.qbik.ch/usb/devices/>/proc/scsi/usb-storage-0/1 : Host scsi1: usb-storage Vendor: ASAHI PENTAX Product: PENTAX OPTIO 430RS Serial Number: None Protocol: 8070i Transport: Control/Bulk GUID: 0a1700040000000000000000 Attached: Yes /proc/scsi/scsi (before camera turned off): Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TOSHIBA Model: DVD-ROM SD-C2302 Rev: 1013 Type: CD-ROM ANSI SCSI revision: 02 /var/log/messages : Oct 16 08:41:49 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 5 Oct 16 08:41:52 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product a17/4/1000 Oct 16 08:42:13 localhost kernel: usb.c: USB disconnect on device 5 dmesg : hub.c: USB new device connect on bus1/1, assigned device number 5 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 5 usb.c: USB disconnect on device 5 SCSI is enabled, and all usb modules required are loaded. Any assistance will be most appreciated as booting into windoze just to get the pix off the camera is a pain. Thanks in advance. Burt. ------------------------------------------------------- This sf.net email is sponsored by: viaVerio will pay you up to $1,000 for every account that you consolidate with us. http://ad.doubleclick.net/clk;4749864;7604308;v? http://www.viaverio.com/consolidator/osdn.cfm _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
