Greetings, I'm trying to get an Addonics Mini DigiDrive (Model AESDMD4) running. When I plug the unit in, everything seems to work fine for about 20 seconds. Then the whole machine locks up and I have to do a hard reboot. I'm running kernel 2.4.18. I don't know what the problem could be other than that my machine might not like usb devices pretending to be scsi, since my hard drive is scsi, but it automatically sets the usb drive as /dev/sdb, so I see no conflict there.
I've attached a log file from when I plugged it in, unplugged it (before it locked), and then plugged it in a third time. Notice that it fails to recognize it after plugging it in a second time. I appreciate any help I can get. Thanks, Jason
Oct 28 16:55:13 LoneStar syslogd 1.3-3#33.1: restart (remote reception). Oct 28 16:55:13 LoneStar kernel: klogd 1.3-3#33.1, log source = /proc/kmsg started. Oct 28 16:55:13 LoneStar kernel: Inspecting /System.map Oct 28 16:55:13 LoneStar kernel: Loaded 17580 symbols from /System.map. Oct 28 16:55:13 LoneStar kernel: Symbols match kernel version 2.4.18. Oct 28 16:55:13 LoneStar kernel: Loaded 1039 symbols from 13 modules. Oct 28 16:55:43 LoneStar kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Oct 28 16:55:43 LoneStar kernel: scsi2 : SCSI emulation for USB Mass Storage devices Oct 28 16:55:43 LoneStar kernel: Vendor: FLASH CA Model: RD READER Slot A Rev: Oct 28 16:55:43 LoneStar kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 28 16:55:43 LoneStar kernel: Vendor: FLASH CA Model: RD READER Slot D Rev: Oct 28 16:55:43 LoneStar kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 28 16:55:43 LoneStar kernel: Vendor: FLASH CA Model: RD READER Slot S Rev: Oct 28 16:55:43 LoneStar kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 28 16:55:43 LoneStar kernel: Vendor: FLASH CA Model: RD READER Slot M Rev: Oct 28 16:55:43 LoneStar kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 28 16:55:43 LoneStar kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 Oct 28 16:55:43 LoneStar kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 1 Oct 28 16:55:43 LoneStar kernel: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 2 Oct 28 16:55:43 LoneStar kernel: Attached scsi removable disk sde at scsi2, channel 0, id 0, lun 3 Oct 28 16:55:43 LoneStar kernel: SCSI device sdb: 500736 512-byte hdwr sectors (256 MB) Oct 28 16:55:43 LoneStar kernel: sdb: Write Protect is off Oct 28 16:56:01 LoneStar kernel: sdb:SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 6 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:10, sector 6 Oct 28 16:56:01 LoneStar kernel: unable to read partition table Oct 28 16:56:01 LoneStar kernel: sdc : READ CAPACITY failed. Oct 28 16:56:01 LoneStar kernel: sdc : status = 0, message = 00, host = 7, driver = 00 Oct 28 16:56:01 LoneStar kernel: sdc : sense not available. Oct 28 16:56:01 LoneStar kernel: sdc : block size assumed to be 512 bytes, disk size 1GB. Oct 28 16:56:01 LoneStar kernel: sdc:SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 6 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 1 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:20, sector 6 Oct 28 16:56:01 LoneStar kernel: unable to read partition table Oct 28 16:56:01 LoneStar kernel: sdd : READ CAPACITY failed. Oct 28 16:56:01 LoneStar kernel: sdd : status = 0, message = 00, host = 7, driver = 00 Oct 28 16:56:01 LoneStar kernel: sdd : sense not available. Oct 28 16:56:01 LoneStar kernel: sdd : block size assumed to be 512 bytes, disk size 1GB. Oct 28 16:56:01 LoneStar kernel: sdd:SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 6 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 2 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:30, sector 6 Oct 28 16:56:01 LoneStar kernel: unable to read partition table Oct 28 16:56:01 LoneStar kernel: sde : READ CAPACITY failed. Oct 28 16:56:01 LoneStar kernel: sde : status = 0, message = 00, host = 7, driver = 00 Oct 28 16:56:01 LoneStar kernel: sde : sense not available. Oct 28 16:56:01 LoneStar kernel: sde : block size assumed to be 512 bytes, disk size 1GB. Oct 28 16:56:01 LoneStar kernel: sde:SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 6 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 0 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 2 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 4 Oct 28 16:56:01 LoneStar kernel: SCSI disk error : host 2 channel 0 id 0 lun 3 return code = 70000 Oct 28 16:56:01 LoneStar kernel: I/O error: dev 08:40, sector 6 Oct 28 16:56:01 LoneStar kernel: unable to read partition table Oct 28 16:56:01 LoneStar kernel: WARNING: USB Mass Storage data integrity not assured Oct 28 16:56:01 LoneStar kernel: USB Mass Storage device found at 2 Oct 28 16:56:01 LoneStar kernel: usb.c: USB disconnect on device 2 Oct 28 16:56:02 LoneStar /etc/hotplug/usb.agent: ... no modules for USB product 7cc/200/12
