Hello !
I have got MOMOBAY UX-2 USB drive. I use Toshiba SatellitePro 4300. I
tried
to set up this drive with Linux and what I have got.
1. Drive on while system startup
After loading of module "usb-uhci" lamp on drive goes off. And thats
all.
1. Drive off while system startup.
I load first modules as listed. I switch on drive. Lamp is still on.
Messages produced by kernel are in dmesg.
Best ragerds,
Andrzej Walczak
############################################# Logs
#Result of cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=0060 Rev=11.06
S: Manufacturer=In-System Design
S: Product=MOMOBAY UX-2
S: SerialNumber=11100E00004D04D0
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms
#Result of cat /proc/bus/usb/drivers
usbdevfs
hub
usb-storage
#Result of lsmod
Module Size Used by Not tainted
usb-storage 63900 0 (unused)
scsi_mod 55948 1 [usb-storage]
usb-uhci 26756 0 (unused)
binfmt_misc 6052 1 (autoclean)
nfsd 67840 4 (autoclean)
lockd 49792 1 (autoclean) [nfsd]
sunrpc 64404 1 (autoclean) [nfsd lockd]
serial_cs 5216 0 (unused)
xirc2ps_cs 13892 1
#result of dmesg
Linux version 2.4.19-grsec (root@aquarius) (gcc version 2.95.4 20010319
(prerelease)) #9 Fri Nov 8 16:42:06 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bfe0000 (usable)
BIOS-e820: 000000000bfe0000 - 000000000bff0000 (ACPI data)
BIOS-e820: 000000000bff0000 - 000000000c000000 (reserved)
BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
191MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 49120
zone(0): 4096 pages.
zone(1): 45024 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux-2.4.19 ro root=303
Initializing CPU#0
Detected 646.827 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1291.05 BogoMIPS
Memory: 189660k/196480k available (1519k kernel code, 4900k reserved,
521k data, 104k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:05.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
Starting kswapd
vesafb: framebuffer at 0xf0000000, mapped to 0xcc80d000, size 8192k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:8751
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Toshiba System Managment Mode driver v1.11 26/9/2001
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 29
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJSA-210, ATA DISK drive
hdc: CD-224E-BA, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=1222/255/63,
UDMA(33)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 128M @ 0xe0000000
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Enabling device 00:0b.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 00:0b.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Enabling device 00:0b.1 (0000 -> 0002)
PCI: Found IRQ 11 for device 00:0b.1
PCI: Sharing IRQ 11 with 00:0c.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000011
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000007
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 104k freed
Adding Swap: 192772k swap-space (priority -1)
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
eth0: MII link partner: 01e1
eth0: MII selected
eth0: media 100BaseT, silicon revision 5
eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A4:F6:1D:A6
ttyS03 at port 0x02e8 (irq = 3) is a 16550A
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
eth0: MII link partner: 01e1
eth0: MII selected
eth0: media 100BaseT, silicon revision 5
usb-uhci.c: $Revision: 1.275 $ time 16:54:21 Nov 8 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:05.2
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: USB new device connect on bus1/1, assigned device number 2
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 68
usb-storage: Array length appears to be: 70
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xcb0895b4 Out: 0xcb0895a0 Int: 0xcb0895c8
(Period 32)
usb-storage: New GUID 05ab006011100e00004d04d0
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 02 cb 80 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: command_abort() called
usb-storage: usb_stor_bulk_msg() returned -2 xferred 0/255
usb-storage: usb_stor_transfer_partial(): transfer aborted
usb-storage: Bulk data transfer result 0x3
usb-storage: -- transport indicates command was aborted
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 02 cb 80 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: command_abort() called
usb-storage: -- transport indicates command was aborted
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: device_reset() called
usb-storage: Bulk reset requested
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: bus_reset() called
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
