Howdy, I'm building a hardware interface to a PIC using the FTDI usb<->serial chip. I am using 2.2.20 kernel, and I finally got the hardware to respond when I do cat /proc/bus/usb/devices
it comes back with all the right stuff (that took a while!) I've tried to use minicom to talk to /dev/ttyUSB0 (and 1 and 2) but nothing gets to the ftdi chip (at least the rxf line doesn't go low, so I'm assuming no data got sent). I did not change anything like baud rate or handshake control, because the driver ignores all that anyway. Or does it? If minicom won't work, what's an easy way to just do a simple test of /dev/ttyUSBx? I have my PIC set up to do a loop back, so anything that goes into the ftdi just gets sent back. any pointers or ideas appreciated! Patience, persistence, truth, Dr. mike ------------------------------------------------------- This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd522.html _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
