-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Here are some more infos.
So, this is cat devices:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=b000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=066f ProdID=3400 Rev= 0.03
S: Manufacturer=MP3 Player
S: Product=
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=b400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
And cat drivers is:
usbdevfs
hub
48- 63: usbscanner
0- 15: usblp
usb-storage
(please note, i have a usb scanner and usb printer which works)
The system just says "usb mass storage support registered" when i load that
module. I also have an USB-floppy which works with usb-storage (but i do not
connect it to the pc usually). I have not find the napa pa-11 mp3 player in
the supported hardware list, so maybe i can help supporting it?
I am a good C programmer not scared of low-level trhings but i dont know where
to start...
On 21:51, domenica 24 novembre 2002, Brad Hards wrote:
> > It is a napa PA-11 mp3 player with a built-in 64mb smartmedia card and an
> > external slot.
> > The device shows in /proc/bus/usb/devices (kernel 2.4.20rc2) but
> > usb-storage seems not to recognise the device.
> >
> > Can anybody give me ideas about how to manage this device?
>
> It would help a lot if you showed us the contents of /proc/bus/usb/devices
> and /proc/bus/usb/drivers.
>
> Brad
- --
!
Willy Gardiol - [EMAIL PROTECTED]
goemon.polito.it/~gardiol
Use linux for your freedom.
La guerra ha solo l'indicativo presente.
Non c'è passato prossimo o remoto,
non c'è il tempo futuro.
La guerra pesa sul genere femminile,
ma è sempre maschia.
Ennio Remondino
(prefazione a Medici di guerra - Inviati di pace)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE94U8HQ9qolN/zUk4RAokdAJ98+27hmzmGM4wZfJQwul3ypvrkVgCfeUx2
xpzsp9Pt9xna1cfDGW9hZbA=
=0Yq5
-----END PGP SIGNATURE-----
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
