You need to ask the Vendor what their protocol is or reverse engineer the windows driver (USB Snoop can help with that). There is a fair chance that you can use the USB Storage driver with some options but I don't know how to advise on that.
On Mon, 25 Nov 2002, Willy Gardiol wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > I would like to work on it, try to support it, but i do not know exactly where > to start. Can you give me some hints? > > On 06:41, lunedė 25 novembre 2002, Stephen J. Gowdy wrote: > > It is a vendor protocol, not USB Storage so it probably will not work. I > > don't see an entry in the Working Device List either. > > > > On Sun, 24 Nov 2002, Willy Gardiol wrote: > > > -----BEGIN PGP SIGNED MESSAGE----- > > > Hash: SHA1 > > > > > > > > > Here are some more infos. > > > So, this is cat devices: > > > > > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > > S: Product=USB UHCI-alt Root Hub > > > S: SerialNumber=b000 > > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > > P: Vendor=066f ProdID=3400 Rev= 0.03 > > > S: Manufacturer=MP3 Player > > > S: Product= > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA > > > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=ff Driver=(none) > > > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > > S: Product=USB UHCI-alt Root Hub > > > S: SerialNumber=b400 > > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > > > > > And cat drivers is: > > > > > > usbdevfs > > > hub > > > 48- 63: usbscanner > > > 0- 15: usblp > > > usb-storage > > > > > > (please note, i have a usb scanner and usb printer which works) > > > The system just says "usb mass storage support registered" when i load > > > that module. I also have an USB-floppy which works with usb-storage (but > > > i do not connect it to the pc usually). I have not find the napa pa-11 > > > mp3 player in the supported hardware list, so maybe i can help supporting > > > it? > > > I am a good C programmer not scared of low-level trhings but i dont know > > > where to start... > > > > > > On 21:51, domenica 24 novembre 2002, Brad Hards wrote: > > > > > It is a napa PA-11 mp3 player with a built-in 64mb smartmedia card > > > > > and an external slot. > > > > > The device shows in /proc/bus/usb/devices (kernel 2.4.20rc2) but > > > > > usb-storage seems not to recognise the device. > > > > > > > > > > Can anybody give me ideas about how to manage this device? > > > > > > > > It would help a lot if you showed us the contents of > > > > /proc/bus/usb/devices and /proc/bus/usb/drivers. > > > > > > > > Brad > > > > > > - -- > > > ! > > > Willy Gardiol - [EMAIL PROTECTED] > > > goemon.polito.it/~gardiol > > > Use linux for your freedom. > > > > > > La guerra ha solo l'indicativo presente. > > > Non c'č passato prossimo o remoto, > > > non c'č il tempo futuro. > > > La guerra pesa sul genere femminile, > > > ma č sempre maschia. > > > > > > Ennio Remondino > > > (prefazione a Medici di guerra - Inviati di pace) > > > > > > -----BEGIN PGP SIGNATURE----- > > > Version: GnuPG v1.0.6 (GNU/Linux) > > > Comment: For info see http://www.gnupg.org > > > > > > iD8DBQE94U8HQ9qolN/zUk4RAokdAJ98+27hmzmGM4wZfJQwul3ypvrkVgCfeUx2 > > > xpzsp9Pt9xna1cfDGW9hZbA= > > > =0Yq5 > > > -----END PGP SIGNATURE----- > > > > > > > > > > > > ------------------------------------------------------- > > > This sf.net email is sponsored by:ThinkGeek > > > Welcome to geek heaven. > > > http://thinkgeek.com/sf > > > _______________________________________________ > > > [EMAIL PROTECTED] > > > To unsubscribe, use the last form field at: > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > - -- > > ! > Willy Gardiol - [EMAIL PROTECTED] > goemon.polito.it/~gardiol > Use linux for your freedom. > > "... viene infatti considerato tanto pių > civile un paese, quanto pių savie ed > efficenti sono le leggi che impediscono > al misero di essere pių misero e al > potente di essere troppo potente" > > > Primo Levi, Se questo č un uomo > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.0.6 (GNU/Linux) > Comment: For info see http://www.gnupg.org > > iD8DBQE94j4OQ9qolN/zUk4RAmAoAJ9wP1qBVqDJY3vsgYacZtdM1Bd8WwCgkZy0 > mu9DjgRfxQLN3IxUA5VPht0= > =mWJt > -----END PGP SIGNATURE----- > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
