Hello,
I want to use my Lacie Handdrive USB harddrive with my Linux install. My info is RH8.0
Kernel 2.4.18-19, On a Dell Latitude Laptop with USB 1.2.
This machine is dual boot and the disk works well under XP.
The disk is one partition vfat type.
What happens when I connect the disk is:
Dec 24 14:08:06 edusilva-1 /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Dec 24 14:08:06 edusilva-1 /etc/hotplug/usb.agent: Setup usb-storage for USB product
59f/a601/200
Dec 24 14:08:06 edusilva-1 /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Dec 24 14:09:08 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:11:34 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:11:34 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:11:38 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:11:38 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:11:42 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:11:42 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:11:46 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:11:46 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:15:50 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:15:50 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:15:54 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:15:54 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:15:58 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:15:58 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:16:02 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:16:02 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:16:06 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:16:06 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:16:10 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:16:10 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:16:14 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:16:14 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
Dec 24 14:16:18 edusilva-1 kernel: usb_control/bulk_msg: timeout
Dec 24 14:16:18 edusilva-1 kernel: usb.c: error getting string descriptor 0
(error=-110)
The USB hard drive is detected OK in USB devices at the HW level but for some reason,
I guess it has to do with the timeouts above, it is not properly recognized.
/proc/bus/usb is there with devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=dce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=059f ProdID=a601 Rev= 2.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 10mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=100ms
and drivers:
usbdevfs
hub
96-111: hiddev
hid
usb-storage
And on dir 001 I have nothing but 001 and 003 files with 0 size.
On /proc/scsi I have one scsi file:
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Model: Rev:
Type: <NULL> ANSI SCSI revision: ffffffff
and two usb-storage subdir (-0 and -1) with file 0 in usb-storage-0:
Host scsi0: usb-storage
Vendor: LaCie
Product: USB Hard Disk
Serial Number: None
Protocol: Reduced Block Commands (RBC)
Transport: Control/Bulk
GUID: 059fa6010000000000000000
Attached: Yes
And file 1 in usb-storage-1 with nothing.
That's as far as I have been able to get info to see why I can't get it to be
integrated properly into my RH8.0 sys. I suspect that the drivers for the usb storage
are OK.
What else can I do? What can be the root cause? How can I fix it?
Thanks a lot for your help,
Ed.
__________________________________________________________________
The NEW Netscape 7.0 browser is now available. Upgrade now!
http://channels.netscape.com/ns/browsers/download.jsp
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
