Hi! I have a debian system running on the following configuration:
Mainboard : ASUS CUR-DLS dual processor with ServerWorks chipset Processor : 2*Intel P3 1000MHz Kernel : 2.4.19 with ac4 patch Modules loaded: hid 19008 0 (unused) usb-ohci 18336 0 (unused) usbcore 62912 1 [hid usb-ohci] input 3456 0 [hid] When I connect Back-UPS 500 to the USB port I get the following (from dmesg): Jan 16 13:28:10 bdeg kernel: hub.c: port 1, portstatus 300, change 0, 1.5 Mb/s Jan 16 13:28:10 bdeg kernel: hub.c: port 2, portstatus 301, change 1, 1.5 Mb/s Jan 16 13:28:10 bdeg kernel: hub.c: port 2 connection change Jan 16 13:28:10 bdeg kernel: hub.c: port 2, portstatus 301, change 1, 1.5 Mb/s Jan 16 13:28:10 bdeg kernel: hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s Jan 16 13:28:10 bdeg last message repeated 3 times Jan 16 13:28:10 bdeg kernel: hub.c: port 2, portstatus 303, change 10, 1.5 Mb/s Jan 16 13:28:10 bdeg kernel: hub.c: USB new device connect on bus1/2, assigned device number 6 Jan 16 13:28:14 bdeg kernel: usb_control/bulk_msg: timeout Jan 16 13:28:15 bdeg kernel: usb-ohci.c: unlink URB timeout Jan 16 13:28:15 bdeg kernel: usb.c: USB device not accepting new address=6 (error=-110) Jan 16 13:28:15 bdeg kernel: hub.c: port 2, portstatus 303, change 10, 1.5 Mb/s Jan 16 13:28:15 bdeg kernel: hub.c: USB new device connect on bus1/2, assigned device number 7 Jan 16 13:28:19 bdeg kernel: usb_control/bulk_msg: timeout Jan 16 13:28:19 bdeg kernel: usb-ohci.c: unlink URB timeout Jan 16 13:28:19 bdeg kernel: usb.c: USB device not accepting new address=7 (error=-110) Jan 16 13:28:19 bdeg kernel: hub.c: port 3, portstatus 100, change 0, 12 Mb/s Jan 16 13:28:19 bdeg kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb/s Jan 16 13:28:19 bdeg kernel: hub.c: port 1, portstatus 300, change 0, 1.5 Mb/s Jan 16 13:28:19 bdeg kernel: hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s Jan 16 13:28:19 bdeg kernel: hub.c: port 3, portstatus 100, change 0, 12 Mb/s Jan 16 13:28:19 bdeg kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb/s And from /proc/bus/usb/devices : T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=f88a7000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms The device is not recognized by the kernel. Can you help me what could be wrong? thx, Twisty ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com Understand how to protect your customers personal information by implementing SSL on your Apache Web Server. Click here to get our FREE Thawte Apache Guide: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0029en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users