Matt> Could you repeat this test with:
Matt> (a) max_scsi_luns spelled properly on the command line, and
Matt> (b) max_scsi_luns set to 0
D'oh!
Here we go... With max_scsi_luns set to 0, fdisk didn't even find a
device:
# dmesg -n 8
# fdisk /dev/scsi/host0/bus0/target0/lun0/disc
Unable to open /dev/scsi/host0/bus0/target0/lun0/disc
#
No errors were printed to console at all. (Since it is not as
interesting, I've appended the console output for this case to the end
of the email, after the max_scsi_luns=3 case).
Wit max_scsi_luns=3, I got identical results in the shell:
# dmesg -n 8
# fdisk /dev/scsi/host0/bus0/target0/lun0/disc
Unable to read /dev/scsi/host0/bus0/target0/lun0/disc
#
This time, there was some console output. I include the whole thing
here:
memsize environment variable not set: assuming 32MB
CPU revision is: 00018007
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (4 ways)
Linux version 2.4.18_dev-xilleon_x220 ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Red Hat Linux 7.1 2.96-99.1)) #24 Thu Mar 13 09:38:57 PST 2003
KGDB: Using serial line /dev/ttyS1 for session
Determined physical RAM map:
memory: 00080000 @ 00000000 (ROM data)
memory: 00080000 @ 00080000 (reserved)
memory: 01f00000 @ 00100000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: nfsroot=10.0.0.157:/nfsroot,rw,rsize=1024,wsize=1024
max_scsi_luns=3 hda=none hdb=none rw ip=10.0.1.3 console=ttyS0,115200,n,8,1
ide_setup: hda=none
ide_setup: hdb=none
Initializing IRQs
calculating r4koff... CPU frequency 598.42 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 598.01 BogoMIPS
MIPS CPU counter frequency is fixed at 299209896 Hz
Memory: 28456k/31744k available (2230k kernel code, 3288k reserved, 323k data, 4k
init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
Autoconfig PCI channel 0x803804e8
Scanning bus 00, I/O 0x00002000:0x00010001, Mem 0x10000000:0x18000001
00:08.0 Class 0200: 10ec:8139 (rev 10)
I/O at 0x00002000 [size=0x100]
Mem at 0x10000000 [size=0x100]
00:14.0 Class 0480: 1002:4855 (rev 02)
Mem at 0x08000000 [size=0x4000000]
I/O at 0x00002100 [size=0x100]
Mem at 0x10008000 [size=0x8000]
Mem at 0x1c000000 [size=0x2000000]
00:14.1 Class 0101: 1002:4856 (rev 01)
I/O at 0x00002200 [size=0x8]
I/O at 0x00002208 [size=0x4]
I/O at 0x00002210 [size=0x8]
I/O at 0x00002218 [size=0x4]
I/O at 0x00002220 [size=0x10]
00:14.2 Class 0c03: 1002:4857 (rev 0a)
Mem at 0x10010000 [size=0x1000]
00:14.5 Class 0401: 1002:4858 (rev 01)
Mem at 0x10011000 [size=0x100]
00:14.6 Class 0703: 1002:4859 (rev 01)
Mem at 0x10011100 [size=0x100]
irq fixup slot 8 vendor 10ec irq 33
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
NTFS driver v1.1.22 [Flags: R/O]
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module version 2.6.2 (20011118)
i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118)
i2c-proc.o version 2.6.2 (20011118)
initialize_kbd: Keyboard failed self test
pty: 256 Unix98 ptys configured
rs_init() APER_PCUIPA_BASE: 200 200 deviceID: 4855 4855
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Testing ttyS0 (0xbe000010, 0xbe000010)...
Testing ttyS1 (0xbe000000, 0xbe000000)...
ttyS00 at 0xbe000010 (irq = 100) is a 16550A
ttyS01 at 0xbe000000 (irq = 99) is a 16550A
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
X225: IDE controller on PCI bus 00 dev a1
X225: chipset revision 1
XILLEON 225 IDE: rev 01 IDE UDMA controller on pci00:14.1
X225: 100% native mode on irq 3
ide0: BM-DMA at 0x2220-0x2227, BIOS settings: hda:DMA, hdb:DMA
probing for hdc: present=0, media=32, probetype=ATA
probing for hdc: present=0, media=32, probetype=ATAPI
probing for hdd: present=0, media=32, probetype=ATA
probing for hdd: present=0, media=32, probetype=ATAPI
probing for hde: present=0, media=32, probetype=ATA
probing for hde: present=0, media=32, probetype=ATAPI
probing for hdf: present=0, media=32, probetype=ATA
probing for hdf: present=0, media=32, probetype=ATAPI
probing for hdg: present=0, media=32, probetype=ATA
probing for hdg: present=0, media=32, probetype=ATAPI
probing for hdh: present=0, media=32, probetype=ATA
probing for hdh: present=0, media=32, probetype=ATAPI
probing for hdi: present=0, media=32, probetype=ATA
probing for hdi: present=0, media=32, probetype=ATAPI
probing for hdj: present=0, media=32, probetype=ATA
probing for hdj: present=0, media=32, probetype=ATAPI
probing for hdk: present=0, media=32, probetype=ATA
probing for hdk: present=0, media=32, probetype=ATAPI
probing for hdl: present=0, media=32, probetype=ATA
probing for hdl: present=0, media=32, probetype=ATAPI
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.24
8139too: pci dev 00:08.0 (id 10ec:8139 rev ff) is an enhanced 8139C+ chip
8139too: Use the "8139cp" driver for improved performance and stability.
eth0: RealTek RTL8139 Fast Ethernet at 0xb0000000, 00:0a:97:02:0e:09, IRQ 33
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
XILLEON Flash mappings:
Search for id:(00 00) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
JEDEC: Found no Core flash device at location zero
Boot FLASH probe failed
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(2)
JEDEC: Found no User flash device at location zero
User FLASH probe failed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci-pci.c: USB OHCI at membase 0xb0010000, IRQ 2
usb-ohci-pci.c: usb-00:14.2, PCI device 1002:4857 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 1
Product: USB OHCI Root Hub
SerialNumber: b0010000
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
usb.c: registered new driver usblp
printer.c: v0.8:USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
IP-Config: Guessing netmask 255.0.0.0
IP-Config: Complete:
device=eth0, addr=10.0.1.3, mask=255.0.0.0, gw=255.255.255.255,
host=10.0.1.3, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=10.0.0.157, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
hub.c: USB new device connect on bus1/2, assigned device number 2
Looking up port of RPC 100003/2 on 10.0.0.157
Looking up port of RPC 100005/1 on 10.0.0.157
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 4k freed
Manufacturer: ????????????????????????
Product: ?????????????Aa123456789
SerialNumber: Aa1234567890
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: KingByte Model: Multi-card R/W Rev: 0100
Type: Direct-Access ANSI SCSI revision: 02
Vendor: KingByte Model: Multi-card R/W Rev: 0100
Type: Direct-Access ANSI SCSI revision: 02
Vendor: KingByte Model: Multi-card R/W Rev: 0100
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 0
Raw sense data:0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
Partition check:
/dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called
unknown partition table
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 0
Raw sense data:0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
sdb : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host0/bus0/target0/lun1:<7>usb-storage: queuecommand() called
unknown partition table
sdc : READ CAPACITY failed.
sdc : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 0
Raw sense data:0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
sdc : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host0/bus0/target0/lun2:<7>usb-storage: queuecommand() called
unknown partition table
Algorithmics/MIPS FPU Emulator v1.5
serial console detected. Disabling virtual terminals.
init started: BusyBox v0.60.2 (2002.04.03-20:48+0000) multi-call binary
Welcome to prototype Linux
Mounting proc filesystem: [ OK ]
Configuring kernel parameters: [ OK ]
Activating swap partitions: [ OK ]
Setting hostname prototype: [ OK ]
Mounting local filesystems: [ OK ]
Enabling swap space: [ OK ]
Entering non-interactive startup
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting xinetd: [ OK ]
Setting clock: Fri Dec 31 19:00:33 EST 1999 [ OK ]
prototype login: usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Skipping START_STOP command
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 01 00 8b 81 f4 ff ff ff
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: -- Stall on control pipe. Clearing
usb-storage: -- usb_clear_halt() returns 0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0
usb-storage: Unit Attention: not ready to ready transition
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 00 00 3c 80 20 f1 3c 80
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
login:
Login timed out after 60 secon
prototype login:
As I said before, the max_scsi_luns=0 case was less interesting, but I
append the console output here anyway:
memsize environment variable not set: assuming 32MB
CPU revision is: 00018007
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (4 ways)
Linux version 2.4.18_dev-xilleon_x220 ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Red Hat Linux 7.1 2.96-99.1)) #24 Thu Mar 13 09:38:57 PST 2003
KGDB: Using serial line /dev/ttyS1 for session
Determined physical RAM map:
memory: 00080000 @ 00000000 (ROM data)
memory: 00080000 @ 00080000 (reserved)
memory: 01f00000 @ 00100000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: nfsroot=10.0.0.157:/nfsroot,rw,rsize=1024,wsize=1024
max_scsi_luns=0 hda=none hdb=none rw ip=10.0.1.3 console=ttyS0,115200,n,8,1
ide_setup: hda=none
ide_setup: hdb=none
Initializing IRQs
calculating r4koff... CPU frequency 598.42 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 598.01 BogoMIPS
MIPS CPU counter frequency is fixed at 299209896 Hz
Memory: 28456k/31744k available (2230k kernel code, 3288k reserved, 323k data, 4k
init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
Autoconfig PCI channel 0x803804e8
Scanning bus 00, I/O 0x00002000:0x00010001, Mem 0x10000000:0x18000001
00:08.0 Class 0200: 10ec:8139 (rev 10)
I/O at 0x00002000 [size=0x100]
Mem at 0x10000000 [size=0x100]
00:14.0 Class 0480: 1002:4855 (rev 02)
Mem at 0x08000000 [size=0x4000000]
I/O at 0x00002100 [size=0x100]
Mem at 0x10008000 [size=0x8000]
Mem at 0x1c000000 [size=0x2000000]
00:14.1 Class 0101: 1002:4856 (rev 01)
I/O at 0x00002200 [size=0x8]
I/O at 0x00002208 [size=0x4]
I/O at 0x00002210 [size=0x8]
I/O at 0x00002218 [size=0x4]
I/O at 0x00002220 [size=0x10]
00:14.2 Class 0c03: 1002:4857 (rev 0a)
Mem at 0x10010000 [size=0x1000]
00:14.5 Class 0401: 1002:4858 (rev 01)
Mem at 0x10011000 [size=0x100]
00:14.6 Class 0703: 1002:4859 (rev 01)
Mem at 0x10011100 [size=0x100]
irq fixup slot 8 vendor 10ec irq 33
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
NTFS driver v1.1.22 [Flags: R/O]
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module version 2.6.2 (20011118)
i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118)
i2c-proc.o version 2.6.2 (20011118)
initialize_kbd: Keyboard failed self test
pty: 256 Unix98 ptys configured
rs_init() APER_PCUIPA_BASE: 200 200 deviceID: 4855 4855
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Testing ttyS0 (0xbe000010, 0xbe000010)...
Testing ttyS1 (0xbe000000, 0xbe000000)...
ttyS00 at 0xbe000010 (irq = 100) is a 16550A
ttyS01 at 0xbe000000 (irq = 99) is a 16550A
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
X225: IDE controller on PCI bus 00 dev a1
X225: chipset revision 1
XILLEON 225 IDE: rev 01 IDE UDMA controller on pci00:14.1
X225: 100% native mode on irq 3
ide0: BM-DMA at 0x2220-0x2227, BIOS settings: hda:DMA, hdb:DMA
probing for hdc: present=0, media=32, probetype=ATA
probing for hdc: present=0, media=32, probetype=ATAPI
probing for hdd: present=0, media=32, probetype=ATA
probing for hdd: present=0, media=32, probetype=ATAPI
probing for hde: present=0, media=32, probetype=ATA
probing for hde: present=0, media=32, probetype=ATAPI
probing for hdf: present=0, media=32, probetype=ATA
probing for hdf: present=0, media=32, probetype=ATAPI
probing for hdg: present=0, media=32, probetype=ATA
probing for hdg: present=0, media=32, probetype=ATAPI
probing for hdh: present=0, media=32, probetype=ATA
probing for hdh: present=0, media=32, probetype=ATAPI
probing for hdi: present=0, media=32, probetype=ATA
probing for hdi: present=0, media=32, probetype=ATAPI
probing for hdj: present=0, media=32, probetype=ATA
probing for hdj: present=0, media=32, probetype=ATAPI
probing for hdk: present=0, media=32, probetype=ATA
probing for hdk: present=0, media=32, probetype=ATAPI
probing for hdl: present=0, media=32, probetype=ATA
probing for hdl: present=0, media=32, probetype=ATAPI
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.24
8139too: pci dev 00:08.0 (id 10ec:8139 rev ff) is an enhanced 8139C+ chip
8139too: Use the "8139cp" driver for improved performance and stability.
eth0: RealTek RTL8139 Fast Ethernet at 0xb0000000, 00:0a:97:02:0e:09, IRQ 33
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
XILLEON Flash mappings:
Search for id:(00 00) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
JEDEC: Found no Core flash device at location zero
Boot FLASH probe failed
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(1) type(2)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(2)
JEDEC: Found no User flash device at location zero
User FLASH probe failed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci-pci.c: USB OHCI at membase 0xb0010000, IRQ 2
usb-ohci-pci.c: usb-00:14.2, PCI device 1002:4857 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 1
Product: USB OHCI Root Hub
SerialNumber: b0010000
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
usb.c: registered new driver usblp
printer.c: v0.8:USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
IP-Config: Guessing netmask 255.0.0.0
IP-Config: Complete:
device=eth0, addr=10.0.1.3, mask=255.0.0.0, gw=255.255.255.255,
host=10.0.1.3, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=10.0.0.157, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
hub.c: USB new device connect on bus1/2, assigned device number 2
Looking up port of RPC 100003/2 on 10.0.0.157
Looking up port of RPC 100005/1 on 10.0.0.157
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 4k freed
Manufacturer: ????????????????????????
Product: ?????????????Aa123456789
SerialNumber: Aa1234567890
scsi0 : SCSI emulation for USB Mass Storage devices
Algorithmics/MIPS FPU Emulator v1.5
serial console detected. Disabling virtual terminals.
init started: BusyBox v0.60.2 (2002.04.03-20:48+0000) multi-call binary
Welcome to prototype Linux
Mounting proc filesystem: [ OK ]
Configuring kernel parameters: [ OK ]
Activating swap partitions: [ OK ]
Setting hostname prototype: [ OK ]
Mounting local filesystems: [ OK ]
Enabling swap space: [ OK ]
[EMAIL PROTECTED] non-interactive startup
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting xinetd: [ OK ]
Setting clock: Fri Dec 31 19:00:18 EST 1999 [ OK ]
prototype login:
Thanks for the help!
Dave
-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open!
Get cracking and register here for some mind boggling fun and
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
