Matt> So what do the logs say? If it's not in syslog, dmesg should Matt> show them.
I have posted the logs at http://www.rokulabs.com/phison-console.txt, but for convenience I include them here as well. To see what I was doing in the shell at the time these messages were output, please see http://www.rokulabs.com/phison-console.txt Thanks! memsize environment variable not set: assuming 32MB CPU revision is: 00018007 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Linux version 2.4.18_dev-xilleon_x220 ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-99.1)) #24 Thu Mar 13 09:38:57 PST 2003 KGDB: Using serial line /dev/ttyS1 for session Determined physical RAM map: memory: 00080000 @ 00000000 (ROM data) memory: 00080000 @ 00080000 (reserved) memory: 01f00000 @ 00100000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: nfsroot=10.0.0.157:/nfsroot,rw,rsize=1024,wsize=1024 max_sci_luns=3 hda=none hdb=none rw ip=10.0.1.3 console=ttyS0,115200,n,8,1 ide_setup: hda=none ide_setup: hdb=none Initializing IRQs calculating r4koff... CPU frequency 598.42 MHz Console: colour dummy device 80x25 Calibrating delay loop... 598.01 BogoMIPS MIPS CPU counter frequency is fixed at 299209896 Hz Memory: 28456k/31744k available (2230k kernel code, 3288k reserved, 323k data, 4k init, 0k highmem) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Autoconfig PCI channel 0x803804e8 Scanning bus 00, I/O 0x00002000:0x00010001, Mem 0x10000000:0x18000001 00:08.0 Class 0200: 10ec:8139 (rev 10) I/O at 0x00002000 [size=0x100] Mem at 0x10000000 [size=0x100] 00:14.0 Class 0480: 1002:4855 (rev 02) Mem at 0x08000000 [size=0x4000000] I/O at 0x00002100 [size=0x100] Mem at 0x10008000 [size=0x8000] Mem at 0x1c000000 [size=0x2000000] 00:14.1 Class 0101: 1002:4856 (rev 01) I/O at 0x00002200 [size=0x8] I/O at 0x00002208 [size=0x4] I/O at 0x00002210 [size=0x8] I/O at 0x00002218 [size=0x4] I/O at 0x00002220 [size=0x10] 00:14.2 Class 0c03: 1002:4857 (rev 0a) Mem at 0x10010000 [size=0x1000] 00:14.5 Class 0401: 1002:4858 (rev 01) Mem at 0x10011000 [size=0x100] 00:14.6 Class 0703: 1002:4859 (rev 01) Mem at 0x10011100 [size=0x100] irq fixup slot 8 vendor 10ec irq 33 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED]) devfs: devfs_debug: 0x0 devfs: boot_options: 0x1 NTFS driver v1.1.22 [Flags: R/O] JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module version 2.6.2 (20011118) i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118) i2c-proc.o version 2.6.2 (20011118) initialize_kbd: Keyboard failed self test pty: 256 Unix98 ptys configured rs_init() APER_PCUIPA_BASE: 200 200 deviceID: 4855 4855 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Testing ttyS0 (0xbe000010, 0xbe000010)... Testing ttyS1 (0xbe000000, 0xbe000000)... ttyS00 at 0xbe000010 (irq = 100) is a 16550A ttyS01 at 0xbe000000 (irq = 99) is a 16550A block: 64 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx X225: IDE controller on PCI bus 00 dev a1 X225: chipset revision 1 XILLEON 225 IDE: rev 01 IDE UDMA controller on pci00:14.1 X225: 100% native mode on irq 3 ide0: BM-DMA at 0x2220-0x2227, BIOS settings: hda:DMA, hdb:DMA probing for hdc: present=0, media=32, probetype=ATA probing for hdc: present=0, media=32, probetype=ATAPI probing for hdd: present=0, media=32, probetype=ATA probing for hdd: present=0, media=32, probetype=ATAPI probing for hde: present=0, media=32, probetype=ATA probing for hde: present=0, media=32, probetype=ATAPI probing for hdf: present=0, media=32, probetype=ATA probing for hdf: present=0, media=32, probetype=ATAPI probing for hdg: present=0, media=32, probetype=ATA probing for hdg: present=0, media=32, probetype=ATAPI probing for hdh: present=0, media=32, probetype=ATA probing for hdh: present=0, media=32, probetype=ATAPI probing for hdi: present=0, media=32, probetype=ATA probing for hdi: present=0, media=32, probetype=ATAPI probing for hdj: present=0, media=32, probetype=ATA probing for hdj: present=0, media=32, probetype=ATAPI probing for hdk: present=0, media=32, probetype=ATA probing for hdk: present=0, media=32, probetype=ATAPI probing for hdl: present=0, media=32, probetype=ATA probing for hdl: present=0, media=32, probetype=ATAPI loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.24 8139too: pci dev 00:08.0 (id 10ec:8139 rev ff) is an enhanced 8139C+ chip 8139too: Use the "8139cp" driver for improved performance and stability. eth0: RealTek RTL8139 Fast Ethernet at 0xb0000000, 00:0a:97:02:0e:09, IRQ 33 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted XILLEON Flash mappings: Search for id:(00 00) interleave(1) type(1) Search for id:(00 00) interleave(1) type(1) Search for id:(00 00) interleave(1) type(1) Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(1) type(2) JEDEC: Found no Core flash device at location zero Boot FLASH probe failed Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(2) type(1) Search for id:(00 00) interleave(2) type(1) Search for id:(00 00) interleave(2) type(1) Search for id:(00 00) interleave(2) type(2) Search for id:(00 00) interleave(2) type(2) Search for id:(00 00) interleave(2) type(2) JEDEC: Found no User flash device at location zero User FLASH probe failed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci-pci.c: USB OHCI at membase 0xb0010000, IRQ 2 usb-ohci-pci.c: usb-00:14.2, PCI device 1002:4857 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 1 Product: USB OHCI Root Hub SerialNumber: b0010000 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers usb.c: registered new driver usblp printer.c: v0.8:USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) eth0: Setting half-duplex based on auto-negotiated partner ability 0000. IP-Config: Guessing netmask 255.0.0.0 IP-Config: Complete: device=eth0, addr=10.0.1.3, mask=255.0.0.0, gw=255.255.255.255, host=10.0.1.3, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=10.0.0.157, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. hub.c: USB new device connect on bus1/2, assigned device number 2 Looking up port of RPC 100003/2 on 10.0.0.157 Looking up port of RPC 100005/1 on 10.0.0.157 VFS: Mounted root (nfs filesystem). Mounted devfs on /dev Freeing unused kernel memory: 4k freed Manufacturer: ???????????????????????? Product: ?????????????Aa123456789 SerialNumber: Aa1234567890 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Vendor: KingByte Model: Multi-card R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 Attached scsi removable disk sde at scsi0, channel 0, id 0, lun 4 Attached scsi removable disk sdf at scsi0, channel 0, id 0, lun 5 Attached scsi removable disk sdg at scsi0, channel 0, id 0, lun 6 Attached scsi removable disk sdh at scsi0, channel 0, id 0, lun 7 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. Partition check: /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called unknown partition table sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sdb : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun1:<7>usb-storage: queuecommand() called unknown partition table sdc : READ CAPACITY failed. sdc : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sdc : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun2:<7>usb-storage: queuecommand() called unknown partition table sdd : READ CAPACITY failed. sdd : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sdd : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun3:<7>usb-storage: queuecommand() called unknown partition table sde : READ CAPACITY failed. sde : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sde : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun4:<7>usb-storage: queuecommand() called unknown partition table sdf : READ CAPACITY failed. sdf : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 7 ASC=27 ASCQ= 0 Raw sense data:0x70 0x00 0x07 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x27 0x00 0x00 0x00 0x00 0x00 sdf : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun5:<7>usb-storage: queuecommand() called unknown partition table sdg : READ CAPACITY failed. sdg : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 7 ASC=27 ASCQ= 0 Raw sense data:0x70 0x00 0x07 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x27 0x00 0x00 0x00 0x00 0x00 sdg : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun6:<7>usb-storage: queuecommand() called Algorithmics/MIPS FPU Emulator v1.5 unknown partition table sdh : READ CAPACITY failed. sdh : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 7 ASC=27 ASCQ= 0 Raw sense data:0x70 0x00 0x07 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x27 0x00 0x00 0x00 0x00 0x00 sdh : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target0/lun7:<7>usb-storage: queuecommand() called unknown partition table serial console detected. Disabling virtual terminals. init started: BusyBox v0.60.2 (2002.04.03-20:48+0000) multi-call binary Welcome to prototype Linux Mounting proc filesystem: [ OK ] Configuring kernel parameters: [ OK ] Activating swap partitions: [ OK ] Setting hostname prototype: [ OK ] Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] Entering non-interactive startup Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting xinetd: [ OK ] Setting clock: Fri Dec 31 19:00:59 EST 1999 [ OK ] prototype login: usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Skipping START_STOP command usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 20 00 00 01 00 89 81 f4 ff ff ff usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. SCSI error: host 0 id 0 lun 1 return code = 8000002 Sense class 7, sense error 0, extended sense 0 usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 20 00 00 00 00 00 00 02 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 20 00 00 00 02 00 00 06 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 20 00 00 00 08 00 00 20 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 20 00 00 00 28 00 00 38 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 20 00 00 00 00 3c 80 20 01 3c 80 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Skipping START_STOP command usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 01 00 89 81 f4 ff ff ff usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. SCSI error: host 0 id 0 lun 0 return code = 8000002 Sense class 7, sense error 0, extended sense 0 usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 02 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 02 00 00 06 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 08 00 00 20 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 28 00 00 38 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command WRITE_10 (10 bytes) usb-storage: 2a 00 00 00 00 00 00 00 02 00 ff ff usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: Unit Attention: not ready to ready transition usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 3c 80 usb-storage: -- converting 10 byte sense data to 6 byte usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. p1 usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: Unit Attention: not ready to ready transition usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: Unit Attention: not ready to ready transition usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 6 ASC=28 ASCQ= 0 Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 3c 80 usb-storage: -- converting 10 byte sense data to 6 byte usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. p1 usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 00 00 3c 80 60 01 3c 80 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Skipping START_STOP command usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 01 00 09 81 14 00 00 00 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: Unit Attention: not ready to ready transition usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 00 00 3c 80 a0 01 3c 80 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Skipping START_STOP command usb-storage: *** thread sleeping. VFS: Disk change detected on device sd(8,1) usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: Unit Attention: not ready to ready transition usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: no additional sense information usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 0 Raw sense data:0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 3c 80 usb-storage: -- converting 10 byte sense data to 6 byte usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 3c 80 usb-storage: -- Stall on control pipe. Clearing usb-storage: -- usb_clear_halt() returns 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. unknown partition table ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
