hi! i just got my logitech usb headset (the USB Headset 20)
and it's not recogniced by the audio driver .. is there any way to find out if it *is* supported by the audio driver and just has a differend vendor/product-id? here's what cat /proc/bus/usb/devices says(the part needed): T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=0a01 Rev= 0.06 S: Manufacturer=Logitech S: Product=Logitech USB Headset C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=audio I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=audio I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio E: Ad=01(O) Atr=09(Isoc) MxPS= 192 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=audio I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio E: Ad=82(I) Atr=0d(Isoc) MxPS= 96 Ivl=1ms I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=16ms (at least part of it isn't supported) comments, suggestions? regards, LordVan -- -----BEGIN GEEK CODE BLOCK----- GCS/CC/E/M/MU/S d- s: a--- C++++(++) UL++++ P+ L++++ E W+++ N+++ o-- K w-- O M-- V- PS+ PE-- Y++ PGP+++ t+++ 5+ X- R tv b++++ DI- D+ G++ e-->+++++ h-- !r z- ------END GEEK CODE BLOCK------ ----------------------------------------- This email was sent using SquirrelMail. "Webmail for nuts!" http://squirrelmail.org/ ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
