Hi! Am Thu, 5 Jun 2003 12:20:48 +0200 schrieb Henning Meier-Geinitz <[EMAIL PROTECTED]>:
> I think I have found the source of the problem now. Some scanners > don't like the command that's used to check if the firmware is > already loaded. While that's not a problem on OHCI controllers, > some UHCI controllers don't seem to like that and the driver gets > confused somehow. > > At least after running scannimage even unplugging the scanner and > replugging it prints "device doesn't accept new address" errors. > Unloading and reloading usb-uhci fixes this issue. > > For now I have disabled the firmware test in the gt68xx backend. > You can get a new backend (or snapshot) at > http://www.meier-geinitz.de/sane/gt68xx-backend/ . Maybe the > Debian maintainers will also include the work-around. Thank you very much!!! I'll try this later today. Many greetings, Christoph -- Christoph Bier, Dipl.Oecotroph., Email: [EMAIL PROTECTED] Universitaet Kassel, FG Oekologische Lebensmittelqualitaet und Ernaehrungskultur \\ Postfach 12 52 \\ 37202 Witzenhausen Tel.: +49 (0) 55 42 / 98 -17 21, Fax: -17 13 ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
