Hi all!
Background:
----------------
Last week suddenly occured a problem with
my Scanner, I already discussed at the
SANE-devel-mailinglist. But they don't any
more ideas.
Some months ago I successfully installed
two Mustek BearPaw 2400 CU Plus; one at
my PC at home and one at work. Both run a
Debian Woody-System with Kernel 2.4.21-pre4.
Everything worked fine! But suddenly -- really
suddenly, because I didn't change anything
special apart from the daily 'apt-get update',
'apt-get upgrade' -- last week my scanner at
home came out on strike. The scanner at work
with the same packages running on the pc (from
http://people.debian.org/~aurel32/SANE stable main)
was still working.
Yesterday I took my "home-scanner" to work
to see, whether there's a hardware defect. It
didn't function at work -- 1 minute before the
"work-scanner" functioned (correct spelling?).
So I plugged-in the "work-scanner" again, but
it was also not working anymore. Now both of
the two don't work anymore for any reason I
don't understand. Unloading, reloading the
modules,
Error starting xsane:
--------------------------
(with modules scanner and uhci)
Failed to open device `gt68xx:/dev/usbscanner0':
Error during device I/O.
Error starting xsane:
--------------------------
(with libusb and module uhci)
no devices available
Output scanimage -L:
----------------------------
(modules scanner, uhci)
device `gt68xx:/dev/usbscanner0' is a Mustek
BearPaw 2400 CU Plus flatbed scanner
(libusb, module uhci)
device `gt68xx:libusb:002:002' is a Mustek
BearPaw 2400 CU Plus flatbed scanner
Installed usb-/SANE-related packages:
--------------------------------------------------
sane 1.0.11-2
sane-utils 1.0.12-3
xsane 0.91-4
libusb-0.1-4 0.1.7-1
libusb-dev 0.1.7-1
libsane 1.0.12-3
pike7.2-sane 7.2.340-1
python-imaging 1.1.3-1
python1.5-imag 1.1.3-1
python2.1-imag 1.1.3-1
python2.2-imag 1.1.3-1
Output from /var/log/messages
-----------------------------------------
(very long; sorry for this! But I don't know
what's really relevant.):
- modules scanner, uhci:
Jun 2 20:26:56 lotus kernel: usb.c: registered new driver usbscanner
Jun 2 20:26:56 lotus kernel: scanner.c: 0.4.10:USB Scanner Driver
Jun 2 20:27:03 lotus kernel: uhci.c: USB Universal Host Controller
Interface driver v1.1
Jun 2 20:27:03 lotus kernel: PCI: Found IRQ 9 for device 00:07.3
Jun 2 20:27:03 lotus kernel: PCI: Sharing IRQ 9 with 00:07.2
Jun 2 20:27:03 lotus kernel: PCI: Sharing IRQ 9 with 00:0f.0
Jun 2 20:27:03 lotus kernel: uhci.c: USB UHCI at I/O 0xb800, IRQ 9
Jun 2 20:27:04 lotus kernel: usb.c: new USB bus registered, assigned
bus number 1
Jun 2 20:27:04 lotus kernel: hub.c: USB hub found
Jun 2 20:27:04 lotus kernel: hub.c: 2 ports detected
Jun 2 20:27:04 lotus kernel: PCI: Found IRQ 9 for device 00:07.2
Jun 2 20:27:04 lotus kernel: PCI: Sharing IRQ 9 with 00:07.3
Jun 2 20:27:04 lotus kernel: PCI: Sharing IRQ 9 with 00:0f.0
Jun 2 20:27:04 lotus kernel: uhci.c: USB UHCI at I/O 0xb400, IRQ 9
Jun 2 20:27:04 lotus kernel: usb.c: new USB bus registered, assigned
bus number 2
Jun 2 20:27:04 lotus kernel: hub.c: USB hub found
Jun 2 20:27:04 lotus kernel: hub.c: 2 ports detected
Jun 2 20:27:04 lotus kernel: hub.c: new USB device 00:07.2-1, assigned
address 2
Jun 2 20:27:04 lotus kernel: scanner.c: USB scanner device
(0x055f/0x021d) now attached to scanner0
- starting xsane :
Jun 2 20:28:10 lotus kernel:
Jun 2 20:28:11 lotus kernel: usb_control/bulk_msg: timeout
Jun 2 20:28:11 lotus kernel:
- libusb, modules uhci:
Jun 2 20:29:12 lotus kernel: uhci.c: USB Universal Host Controller
Interface driver v1.1
Jun 2 20:29:12 lotus kernel: PCI: Found IRQ 9 for device 00:07.3
Jun 2 20:29:12 lotus kernel: PCI: Sharing IRQ 9 with 00:07.2
Jun 2 20:29:12 lotus kernel: PCI: Sharing IRQ 9 with 00:0f.0
Jun 2 20:29:12 lotus kernel: uhci.c: USB UHCI at I/O 0xb800, IRQ 9
Jun 2 20:29:12 lotus kernel: usb.c: new USB bus registered, assigned
bus number 1
Jun 2 20:29:12 lotus kernel: hub.c: USB hub found
Jun 2 20:29:12 lotus kernel: hub.c: 2 ports detected
Jun 2 20:29:12 lotus kernel: PCI: Found IRQ 9 for device 00:07.2
Jun 2 20:29:12 lotus kernel: PCI: Sharing IRQ 9 with 00:07.3
Jun 2 20:29:12 lotus kernel: PCI: Sharing IRQ 9 with 00:0f.0
Jun 2 20:29:12 lotus kernel: uhci.c: USB UHCI at I/O 0xb400, IRQ 9
Jun 2 20:29:12 lotus kernel: usb.c: new USB bus registered, assigned
bus number 2
Jun 2 20:29:12 lotus kernel: hub.c: USB hub found
Jun 2 20:29:12 lotus kernel: hub.c: 2 ports detected
Jun 2 20:29:13 lotus kernel: hub.c: new USB device 00:07.2-1, assigned
address 2
Jun 2 20:29:13 lotus kernel: usb.c: USB device 2 (vend/prod
0x55f/0x21d) is not claimed by any active driver.
- starting xsane:
no message in /var/log/messages (I guess
explainable from the above message in the
last line)
Very long posting, I know, but I hope, that it
contains all the relevant information and not
too much garbage.
Any help appreciated! Thanks in advance.
Many greetings,
Christoph
--
Christoph Bier, Dipl.Oecotroph., Email: [EMAIL PROTECTED]
Universitaet Kassel, FG Oekologische Lebensmittelqualitaet und
Ernaehrungskultur \\ Postfach 12 52 \\ 37202 Witzenhausen
Tel.: +49 (0) 55 42 / 98 -17 21, Fax: -17 13
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
