you did mean /proc/bus/usb/devices right ? here it is
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=dc00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=08ca ProdID=0107 Rev= 1.00 S: Manufacturer=Aiptek Co Ltd S: Product=DV 3100 S: SerialNumber=01.00.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 1 Ivl=1ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.20-8 ehci-hcd S: Product=VIA Technologies, Inc. USB 2.0 S: SerialNumber=00:10.3 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms cheers dave On Thu, 2003-05-29 at 18:52, Stephen J. Gowdy wrote: > You seem to be missing the most relevant part of that file. Can you send > the entire contents? > > On Thu, 29 May 2003, dave frost wrote: > > > hi chaps, i have got myself a usb camera (aiptek dv 3100). Some other > > aiptek cameras seem to be supported but this one isnt in the list (i > > thought usb was proper plug-n-play ?) > > > > This is what i get from /proc/bus/usb/devices > > > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 > > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=08ca ProdID=0107 Rev= 1.00 > > S: Manufacturer=Aiptek Co Ltd > > S: Product=DV 3100 > > S: SerialNumber=01.00.00 > > > > Can someone tell a little about what the above means - and if it > > suggests that it wont work as i get: > > > > May 29 18:47:46 scratchy kernel: usb-uhci.c: interrupt, status 3, frame# > > 983 > > May 29 18:47:46 scratchy kernel: SCSI device (ioctl) reports ILLEGAL > > REQUEST. > > May 29 18:47:46 scratchy kernel: SCSI device sda: 507904 512-byte hdwr > > sectors (260 MB) > > May 29 18:47:46 scratchy kernel: sda: test WP failed, assume Write > > Enabled > > May 29 18:47:46 scratchy kernel: sda: I/O error: dev 08:00, sector 0 > > May 29 18:47:46 scratchy kernel: I/O error: dev 08:00, sector 0 > > May 29 18:47:46 scratchy kernel: unable to read partition table > > May 29 18:47:47 scratchy devlabel: devlabel service started/restarted > > > > from /var/log/messages. > > > > This is a little worrying ! > > > > and mount reports > > > > usbdevfs on /proc/bus/usb type usbdevfs (rw) > > > > any help with gwetting my camera working would be great - does it seem > > possible ? > > > > (ps this is my first 'usb' gadget thats why i may seem a llittle dim :-) > > > > cheers > > > > dave > > > > > > > > > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: eBay > > Get office equipment for less on eBay! > > http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 > > _______________________________________________ > > [EMAIL PROTECTED] > > To unsubscribe, use the last form field at: > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > -- > /------------------------------------+-------------------------\ > |Stephen J. Gowdy | SLAC, MailStop 34, | > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
