hi chaps, i have got myself a usb camera (aiptek dv 3100). Some other aiptek cameras seem to be supported but this one isnt in the list (i thought usb was proper plug-n-play ?)
This is what i get from /proc/bus/usb/devices C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=08ca ProdID=0107 Rev= 1.00 S: Manufacturer=Aiptek Co Ltd S: Product=DV 3100 S: SerialNumber=01.00.00 Can someone tell a little about what the above means - and if it suggests that it wont work as i get: May 29 18:47:46 scratchy kernel: usb-uhci.c: interrupt, status 3, frame# 983 May 29 18:47:46 scratchy kernel: SCSI device (ioctl) reports ILLEGAL REQUEST. May 29 18:47:46 scratchy kernel: SCSI device sda: 507904 512-byte hdwr sectors (260 MB) May 29 18:47:46 scratchy kernel: sda: test WP failed, assume Write Enabled May 29 18:47:46 scratchy kernel: sda: I/O error: dev 08:00, sector 0 May 29 18:47:46 scratchy kernel: I/O error: dev 08:00, sector 0 May 29 18:47:46 scratchy kernel: unable to read partition table May 29 18:47:47 scratchy devlabel: devlabel service started/restarted from /var/log/messages. This is a little worrying ! and mount reports usbdevfs on /proc/bus/usb type usbdevfs (rw) any help with gwetting my camera working would be great - does it seem possible ? (ps this is my first 'usb' gadget thats why i may seem a llittle dim :-) cheers dave ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
