Le mer 11/06/2003 à 19:35, Ged Haywood a écrit : > On 11 Jun 2003, Sylvain Pasche wrote: > > [snip,snip] > > When I boot on linux, with the mouse plugged in, it is powered (optical > > light is on), and perfectly detected by the host controller. > > > > When I plug out the mouse, I see the standard message: > > usb.c: USB disconnect on device 00:1d.1-1 address 2 > > > > However, when I plug the mouse again in the usb slot, there is no kernel > > message displayed, and the mouse is not powered (no optical light on). > > > > I am using usb from 2.4.21-rc5. I tried both usb-uhci, and ehci-hcd, and > > the result is the same. I also tried 2.4.20 with knoppix (usb-uhci). > > You're lucky it doesn't crash. I had these problems with several USB > things and kernels 2.4.18 to 2.4.20. Whatever the problem it seems > fixed by using 2.5.69 and the latest hotplug release. Of course there > might be more than one problem.
Thanks for your advice. I tried with 2.5.70, and it works fine with the uhci_hcd module. Otherwise, I did not get positive results with both ehci_hcd and ohci_hcd. I tried with the latest 2.4 (2.4.21-rc8), but still failure. The conclusion of all this looks like the "intel 82801DB USB rev 01" is ok, but the next revision "intel 82801DB USB rev 02" does not work anymore with 2.4. Let's hope there will be some backports to the 2.4 Regards, Sylvain ------------------------------------------------------- This SF.NET email is sponsored by: eBay Great deals on office technology -- on eBay now! Click here: http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
