Thanks, On Wednesday 20 August 2003 12:13, Henning Meier-Geinitz wrote: > Hi, .... > It does not answer when you do what exactly? It dont answer at boot time, when USB modules is loaded in the debug log i see this errors: Aug 18 09:53:36 italo kernel: 0: [c1203030] link (01203060) e0 Stalled NAK CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2,) Aug 18 09:53:36 italo kernel: 1: [c1203060] link (01203090) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN)) Aug 18 09:53:36 italo kernel: 2: [c1203090] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(O)
> > If you really think it's akernel issue, please try a current > 2.6.0-test kernel. > Ok i try, but i'm not sure, maybe is an error :-) > > ------------ kernel 2.5 logs ----------- > > Aug 18 09:53:35 italo kernel: drivers/usb/core/message.c: > > usb_control/bulk_msg: timeout > > Is this your scanner? What did you do when it happened? Was the > scanner module loaded? I try with scanner module or with libusb and the problem is always the same. The timeout occurs when i launch xsane for example. (I try to increase from 5 seconds to 30 seconds the timeout but this patch dont avoid the problem) > > What happens when you try to scan (as root, to avoid permission > problems): During the test i had use always root. (I try from a different PC, an asus laptop and i have the same problem) I have to download the 2.6 kernel, as soon as possible i'll test the scanner on it. Thanks Daniele ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
