On Fri, 19 Sep 2003, Stephen J. Gowdy wrote:
> It should have found the first device though, even if that was off. You
> might want to check other scsi support options too.
OK, I've recompiled 2.4.20 with MULTI_LUN support on and rebooted with my
newly compiled kernel. Additionally, I've added this to
/etc/modules.conf:
options scsi_mod max_scsi_luns=32
although I get the same results whether or not this statement is present.
However, I'm continuing to see only /dev/sda defined for the Y-E unit.
No devices are being defined for the card slots. In short, nothing has
changed compared to before I enabled MULTI_LUN support on.
Here's the device as shown in /proc/scsi/scsi:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Here's what appears in /var/log/messages if I issue 'fdisk -l /dev/sda':
Sep 20 14:22:19 dino kernel: usb-uhci.c: interrupt, status 3, frame# 1071
Sep 20 14:22:19 dino kernel: sda : READ CAPACITY failed.
Sep 20 14:22:19 dino kernel: sda : status = 1, message = 00, host = 0,
driver =
08
Sep 20 14:22:19 dino kernel: Current sd00:00: sense key Not Ready
Sep 20 14:22:19 dino kernel: Additional sense indicates Medium not present
Sep 20 14:22:19 dino kernel: sda : block size assumed to be 512 bytes,
disk size
1GB.
Sep 20 14:22:19 dino kernel: sda: I/O error: dev 08:00, sector 0
Sep 20 14:22:19 dino kernel: I/O error: dev 08:00, sector 0
Sep 20 14:22:19 dino kernel: unable to read partition table
Since enabling MULTI_LUN support didn't do the trick, I'm sure I must be
doing something else wrong. Any suggestions of what I ought to look into
next?
Thanks,
Dave
--
Dave Ulrick
Email: [EMAIL PROTECTED]
Web: http://www.niu.edu/~ulrick/
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
