Hi. After trying some different multi-slot card reader/writer, and fixing a problem caused by an unformatted SMC, I'd like to report the status of my current device. Where should this report has gone to?
A last question is left: as noted above, my test SMC was not/badly formatted, and therefore I could not mount it. The work-around was to put it in my digital camera and format it there. How can I format media via the card writer? Thanks in advance, Bodo --- The technical stuff: --- My system is an out-of-the-box SuSE 8.2 Linux distribution, upgraded from SUSE 7.2. The device is sold in germany as "Hama Card Reader Writer 6in1" for about EUR 10. [EMAIL PROTECTED]:~ # uname -a Linux aldebaran 2.4.20-4GB #1 Mon Mar 17 17:54:44 UTC 2003 i686 unknown unknown GNU/Linux [EMAIL PROTECTED]:~ # lsusb Bus 002 Device 001: ID 0000:0000 Bus 002 Device 002: ID 05cc:2267 ELSA AG Bus 001 Device 001: ID 0000:0000 Bus 001 Device 002: ID 058f:9360 Alcor Micro Corp. (As you might recognize, I'm on a dial-up ;-) [EMAIL PROTECTED]:~ # usbmodules --device /proc/bus/usb/001/002 usb-storage [EMAIL PROTECTED]:~ # cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 P: Vendor=05cc ProdID=2267 Rev= 1.00 S: Manufacturer=Lucent Technologies, Inc. S: Product=ELSA Modem Board C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 63 Ivl=2ms C:* #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm E: Ad=84(I) Atr=03(Int.) MxPS= 32 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=058f ProdID=9360 Rev= 1.00 S: Manufacturer=Generic S: Product=Mass Storage Device S: SerialNumber=9206051 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms [EMAIL PROTECTED]:~ # cat /proc/scsi/sg/device_strs TOSHIBA DVD-ROM SD-M1402 1010 CD-RW CDR-2440MB 5SGA Generic USB SD Reader 1.00 Generic USB CF Reader 1.01 Generic USB SM Reader 1.02 Generic USB MS Reader 1.03 The SCSI devices are mountable as /dev/sd[abcd]1. ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
