On Sun, 26 Oct 2003, 9x6is42 wrote:

> Hi.
>
> After trying some different multi-slot card reader/writer, and fixing a
> problem caused by an unformatted SMC, I'd like to report the status of my
> current device. Where should this report has gone to?

Try the Working Device List, linked from the Linux USB webpage.

> A last question is left: as noted above, my test SMC was not/badly formatted,
> and therefore I could not mount it. The work-around was to put it in my
> digital camera and format it there. How can I format media via the card
> writer?

Does fdisk/mkfs now work?

> Thanks in advance,
> Bodo
>
> --- The technical stuff: ---
>
> My system is an out-of-the-box SuSE 8.2 Linux distribution, upgraded from SUSE
> 7.2. The device is sold in germany as "Hama Card Reader Writer 6in1" for
> about EUR 10.
>
> [EMAIL PROTECTED]:~ # uname -a
> Linux aldebaran 2.4.20-4GB #1 Mon Mar 17 17:54:44 UTC 2003 i686 unknown
> unknown GNU/Linux
>
> [EMAIL PROTECTED]:~ # lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 002 Device 002: ID 05cc:2267 ELSA AG
> Bus 001 Device 001: ID 0000:0000
> Bus 001 Device 002: ID 058f:9360 Alcor Micro Corp.
>
> (As you might recognize, I'm on a dial-up ;-)
>
> [EMAIL PROTECTED]:~ # usbmodules --device /proc/bus/usb/001/002
> usb-storage
>
> [EMAIL PROTECTED]:~ # cat /proc/bus/usb/devices
> T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  2
> P:  Vendor=05cc ProdID=2267 Rev= 1.00
> S:  Manufacturer=Lucent Technologies, Inc.
> S:  Product=ELSA Modem Board
> C:  #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=400mA
> I:  If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  16 Ivl=0ms
> E:  Ad=84(I) Atr=03(Int.) MxPS=  63 Ivl=2ms
> C:* #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=400mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
> E:  Ad=84(I) Atr=03(Int.) MxPS=  32 Ivl=128ms
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=058f ProdID=9360 Rev= 1.00
> S:  Manufacturer=Generic
> S:  Product=Mass Storage Device
> S:  SerialNumber=9206051
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
>
> [EMAIL PROTECTED]:~ # cat /proc/scsi/sg/device_strs
> TOSHIBA         DVD-ROM SD-M1402        1010
> CD-RW           CDR-2440MB              5SGA
> Generic         USB SD Reader           1.00
> Generic         USB CF Reader           1.01
> Generic         USB SM Reader           1.02
> Generic         USB MS Reader           1.03
>
> The SCSI devices are mountable as /dev/sd[abcd]1.
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: The SF.net Donation Program.
> Do you like what SourceForge.net is doing for the Open
> Source Community?  Make a contribution, and help us add new
> features and functionality. Click here: http://sourceforge.net/donate/
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>

--
 /------------------------------------+-------------------------\
|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
 \------------------------------------+-------------------------/


-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community?  Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to