Well, I don't understand what you mean... But if the content of
/proc/interrupts helps here it is:
CPU0
0: 9019038 XT-PIC timer
1: 48857 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 5486266 XT-PIC nvidia
8: 21556 XT-PIC rtc
9: 141 XT-PIC Intel ICH2
11: 142438 XT-PIC aic7xxx, usb-uhci
12: 15418175 XT-PIC usb-uhci, eth0
14: 175029 XT-PIC ide0
15: 172 XT-PIC ide1
NMI: 0
ERR: 0
On Thu, 6 Nov 2003, Stephen J. Gowdy wrote:
> Are the interupts on its line increasing?
>
> On Thu, 6 Nov 2003, Sergio Pascual wrote:
>
> >
> > Sorry, root hubs, thats what I wanted to say. If I plug something in the
> > second root-hub, they don't work. But this root-hub appears in usbview, in
> > /proc/bus/usb and listed in lspci
> >
> >
> >
> > On Thu, 6 Nov 2003, Stephen J. Gowdy wrote:
> >
> > > I only see root-hubs, no actual hubs in the devices file. Are you saying
> > > if you plug something into some sockets on your motherboard they don't
> > > work?
> > >
> > > On Wed, 5 Nov 2003 [EMAIL PROTECTED] wrote:
> > >
> > > >
> > > > Well, I have a PC box, kernel 2.4.20-20.9 with two hubs. On booting I have
> > > > this messages
> > > > relevant to usb
> > > >
> > > > usb.c: registered new driver usbdevfs
> > > > usb.c: registered new driver hub
> > > > usb-uhci.c: $Revision: 1.275 $ time 11:55:13 Aug 18 2003
> > > > usb-uhci.c: High bandwidth mode enabled
> > > > usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 12
> > > > usb-uhci.c: Detected 2 ports
> > > > usb.c: new USB bus registered, assigned bus number 1
> > > > usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
> > > > usb-uhci.c: Detected 2 ports
> > > > usb.c: new USB bus registered, assigned bus number 2
> > > > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> > > > usb.c: registered new driver hiddev
> > > > usb.c: registered new driver hid
> > > > input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:2.0
> > > > usb.c: USB device 3 (vend/prod 0x478/0x1) is not claimed by any active
> > > > driver.
> > > > qcamvc_usb: init
> > > > usb.c: registered new driver Connectix QuickCam VC
> > > >
> > > > An after that, whith usbview I see the two hubs and two devices in one of
> > > > them, the mouse and the cam. But nothing that I plug in the other hub
> > > > is
> > > > detected or appears in the logs. I am completely lost, and after googling
> > > > for a while and searching in the list I haven't found anything
> > > >
> > > > I have attached my /proc/bus/usb/devices and the output of lspci -vv
> > > >
> > > > I am completely lost, and after googling
> > > > for a while and searching in the list I haven't found anything.
> > > >
> > > > I hace noticed that other machines with redhat linux have the same
> > > > problem, i.e., the second usb hub is not working
> > > >
> > > > Thanks a lot
> > > >
> > >
> > > --
> > > /------------------------------------+-------------------------\
> > > |Stephen J. Gowdy | SLAC, MailStop 34, |
> > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
> > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
> > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
> > > \------------------------------------+-------------------------/
> > >
> >
> >
>
> --
> /------------------------------------+-------------------------\
> |Stephen J. Gowdy | SLAC, MailStop 34, |
> |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
> |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
> |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
> \------------------------------------+-------------------------/
>
--
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Sergio Pascual Ram�rez [EMAIL PROTECTED]
Tf: (+34) 91-394-50-18 Fax: (+34) 91-394-46-35
Dept. Astrof�sica Facultad de C.C. F�sicas
Universidad Complutense de Madrid
28040 Madrid (Spain)
------------------------------------------------------------------------------
- Yo tambi�n quiero una Europa libre de Patentes de Software -
--------------------------------------------------------------
EuropeSwPatentFree - http://EuropeSwPatentFree.hispalinux.es
--------------------------------------------------------------
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
