Hi,
several oops got using kernel 2.4.23 presumably turning off the usb
printer to stop an unwanted job...
############ OOPS#1 #############
Dec 12 17:58:28 cripat kernel: Unable to handle kernel paging request at
virtual address 5a01954c
Dec 12 17:58:28 cripat kernel: c014dd53
Dec 12 17:58:28 cripat kernel: *pde = 00000000
Dec 12 17:58:28 cripat kernel: Oops: 0002
Dec 12 17:58:28 cripat kernel: CPU: 0
Dec 12 17:58:28 cripat kernel: EIP: 0010:[dput+19/336] Tainted: P
Dec 12 17:58:28 cripat kernel: EFLAGS: 00010202
Dec 12 17:58:28 cripat kernel: eax: c158e354 ebx: 5a01954c ecx:
ca97d000 edx: c158e35c
Dec 12 17:58:28 cripat kernel: esi: ca97d3f0 edi: d73e23f4 ebp:
c15adef4 esp: c15adee4
Dec 12 17:58:28 cripat kernel: ds: 0018 es: 0018 ss: 0018
Dec 12 17:58:28 cripat kernel: Process kswapd (pid: 4,
stackpage=c15ad000)
Dec 12 17:58:28 cripat kernel: Stack: ca97d3f0 5a01954c 5a01954c
ca97d3f0 c15adf10 c014e13b 5a01954c ca97d3f0
Dec 12 17:58:28 cripat kernel: 00000003 c11f2590 c02fdb58
c15adf1c c014e435 000000fb c15adf4c c01341ee
Dec 12 17:58:28 cripat kernel: 00000006 000001d0 c15ac000
ffffffff 0000387a 000001d0 00000003 00000020
Dec 12 17:58:28 cripat kernel: Call Trace: [prune_dcache+283/336]
[shrink_dcache_memory+37/64] [shrink_cache+350/880]
[shrink_caches+60/80] [try_to_free_pages_zone+83/224]
Dec 12 17:58:28 cripat kernel: Code: ff 0b 0f 94 c0 84 c0 0f 84 bf 00 00
00 8d 73 18 39 73 18 74
Using defaults from ksymoops -t elf32-i386 -a i386
>>eax; c158e354 <_end+11fca80/2051d7ac>
>>ecx; ca97d000 <_end+a5eb72c/2051d7ac>
>>edx; c158e35c <_end+11fca88/2051d7ac>
>>esi; ca97d3f0 <_end+a5ebb1c/2051d7ac>
>>edi; d73e23f4 <_end+17050b20/2051d7ac>
>>ebp; c15adef4 <_end+121c620/2051d7ac>
>>esp; c15adee4 <_end+121c610/2051d7ac>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: ff 0b decl (%ebx)
Code; 00000002 Before first symbol
2: 0f 94 c0 sete %al
Code; 00000005 Before first symbol
5: 84 c0 test %al,%al
Code; 00000007 Before first symbol
7: 0f 84 bf 00 00 00 je cc <_EIP+0xcc>
Code; 0000000d Before first symbol
d: 8d 73 18 lea 0x18(%ebx),%esi
Code; 00000010 Before first symbol
10: 39 73 18 cmp %esi,0x18(%ebx)
Code; 00000013 Before first symbol
13: 74 00 je 15 <_EIP+0x15>
################ OOPS #2 ###########################
Dec 12 14:38:14 cripat kernel: NMI Watchdog detected LOCKUP on CPU0, eip
c0118aec, registers:
Dec 12 14:38:14 cripat kernel: CPU: 0
Dec 12 14:38:14 cripat kernel: EIP: 0010:[schedule+268/832]
Tainted: P
Dec 12 14:38:14 cripat kernel: EFLAGS: 00200082
Dec 12 14:38:14 cripat kernel: eax: e0806038 ebx: e0806038 ecx:
e0805ffc edx: e0806020
Dec 12 14:38:14 cripat kernel: esi: cd042000 edi: 00000017 ebp:
cedd1fbc esp: cedd1f94
Dec 12 14:38:14 cripat kernel: ds: 0018 es: 0018 ss: 0018
Dec 12 14:38:14 cripat kernel: Process realplay (pid: 10097,
stackpage=cedd1000)
Dec 12 14:38:14 cripat kernel: Stack: 000036d8 40321290 cedd1fbc
de559c74 cedd0000 00000000 c0361100 cedd0000
Dec 12 14:38:14 cripat kernel: 00000002 40321290 bff7f1b0
c01090bd 00000003 bff7f250 00000002 00000002
Dec 12 14:38:14 cripat kernel: 40321290 bff7f1b0 000036d8
0000002b 0000002b 00000092 402c237e 00000023
Dec 12 14:38:14 cripat kernel: Call Trace: [reschedule+5/12]
Dec 12 14:38:14 cripat kernel: Code: 89 da 89 c3 0f 0d 00 81 fa 64 c2 2f
c0 75 b5 85 ff 0f 84 42
Using defaults from ksymoops -t elf32-i386 -a i386
>>eax; e0806038 <_end+20474764/2051d7ac>
>>ebx; e0806038 <_end+20474764/2051d7ac>
>>ecx; e0805ffc <_end+20474728/2051d7ac>
>>edx; e0806020 <_end+2047474c/2051d7ac>
>>esi; cd042000 <_end+ccb072c/2051d7ac>
>>ebp; cedd1fbc <_end+ea406e8/2051d7ac>
>>esp; cedd1f94 <_end+ea406c0/2051d7ac>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 89 da mov %ebx,%edx
Code; 00000002 Before first symbol
2: 89 c3 mov %eax,%ebx
Code; 00000004 Before first symbol
4: 0f 0d 00 prefetch (%eax)
Code; 00000007 Before first symbol
7: 81 fa 64 c2 2f c0 cmp $0xc02fc264,%edx
Code; 0000000d Before first symbol
d: 75 b5 jne ffffffc4 <_EIP+0xffffffc4>
Code; 0000000f Before first symbol
f: 85 ff test %edi,%edi
Code; 00000011 Before first symbol
11: 0f 84 42 00 00 00 je 59 <_EIP+0x59>
########################## OOPS #3 #########################
Dec 12 15:22:59 cripat kernel: Unable to handle kernel paging request at
virtual address 0059003c
Dec 12 15:22:59 cripat kernel: c0118aea
Dec 12 15:22:59 cripat kernel: *pde = 00000000
Dec 12 15:22:59 cripat kernel: Oops: 0000
Dec 12 15:22:59 cripat kernel: CPU: 0
Dec 12 15:22:59 cripat kernel: EIP: 0010:[schedule+266/832]
Tainted: P
Dec 12 15:22:59 cripat kernel: EFLAGS: 00010003
Dec 12 15:22:59 cripat kernel: eax: 00000019 ebx: 0059003c ecx:
c9878000 edx: de559f1c
Dec 12 15:22:59 cripat kernel: esi: c9878000 edi: 00000019 ebp:
db591fbc esp: db591f94
Dec 12 15:22:59 cripat kernel: ds: 0018 es: 0018 ss: 0018
Dec 12 15:22:59 cripat kernel: Process realplay (pid: 11674,
stackpage=db591000)
Dec 12 15:22:59 cripat kernel: Stack: 000036d8 40316290 db591fbc
de559e94 db590000 00000000 c0361100 db590000
Dec 12 15:23:00 cripat kernel: 00000002 40316290 bff7f240
c01090bd 00000003 bff7f2e0 00000002 00000002
Dec 12 15:23:00 cripat kernel: 40316290 bff7f240 000036d8
0000002b 0000002b 00000092 402b737e 00000023
Dec 12 15:23:00 cripat kernel: Call Trace: [reschedule+5/12]
Dec 12 15:23:00 cripat kernel: Code: 8b 03 89 da 89 c3 0f 0d 00 81 fa 64
c2 2f c0 75 b5 85 ff 0f
Using defaults from ksymoops -t elf32-i386 -a i386
>>ecx; c9878000 <_end+94e672c/2051d7ac>
>>edx; de559f1c <_end+1e1c8648/2051d7ac>
>>esi; c9878000 <_end+94e672c/2051d7ac>
>>ebp; db591fbc <_end+1b2006e8/2051d7ac>
>>esp; db591f94 <_end+1b2006c0/2051d7ac>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 03 mov (%ebx),%eax
Code; 00000002 Before first symbol
2: 89 da mov %ebx,%edx
Code; 00000004 Before first symbol
4: 89 c3 mov %eax,%ebx
Code; 00000006 Before first symbol
6: 0f 0d 00 prefetch (%eax)
Code; 00000009 Before first symbol
9: 81 fa 64 c2 2f c0 cmp $0xc02fc264,%edx
Code; 0000000f Before first symbol
f: 75 b5 jne ffffffc6 <_EIP+0xffffffc6>
Code; 00000011 Before first symbol
11: 85 ff test %edi,%edi
Code; 00000013 Before first symbol
13: 0f 00 00 sldtl (%eax)
and cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 1700+
stepping : 2
cpu MHz : 1470.019
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2936.01
cat /proc/version:
Linux version 2.4.23 ([EMAIL PROTECTED]) (gcc version 3.3.2 (Debian)) #1 Sat
Nov 29 13:39:54 CET 2003
cat /proc/modules:
printer 7264 0 (unused)
input 3424 0 (autoclean)
audio 41976 0 (unused)
agpgart 14000 3 (autoclean)
nvidia 1630112 11 (autoclean)
ip_nat_irc 2160 0 (unused)
ip_conntrack_irc 3120 1
ip_conntrack_ftp 3952 1 (autoclean)
ip_nat_ftp 2800 0 (unused)
ipt_unclean 6968 0 (unused)
ipt_state 568 10
ipt_REJECT 3512 0 (unused)
ipt_REDIRECT 760 0 (unused)
ipt_multiport 696 5
ipt_MIRROR 1304 0 (unused)
ipt_MASQUERADE 1368 1
ipt_LOG 3512 0 (unused)
ipt_limit 920 0 (unused)
iptable_nat 15726 3 [ip_nat_irc ip_nat_ftp ipt_REDIRECT
ipt_MASQUERADE]
iptable_mangle 2168 0 (unused)
iptable_filter 1740 1
ip_queue 5712 0 (unused)
ip_tables 12032 14 [ipt_unclean ipt_state ipt_REJECT
ipt_REDIRECT ipt_multiport ipt_MIRROR ipt_MASQUERADE ipt_LOG ipt_limit
iptable_nat iptable_mangle iptable_filter]
parport_pc 15556 1 (autoclean)
lp 6592 0 (autoclean)
parport 25608 1 (autoclean) [parport_pc lp]
ppp_deflate 3480 0 (autoclean)
zlib_inflate 18436 0 (autoclean) [ppp_deflate]
zlib_deflate 18040 0 (autoclean) [ppp_deflate]
bsd_comp 4120 0 (autoclean)
ppp_async 7488 1 (autoclean)
snd-seq-oss 28896 0 (unused)
snd-seq-midi-event 3296 0 [snd-seq-oss]
snd-seq 36368 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 37572 1
snd-mixer-oss 12976 1 [snd-pcm-oss]
snd-via82xx 13600 3
snd-pcm 59812 0 [snd-pcm-oss snd-via82xx]
snd-timer 14404 0 [snd-seq snd-pcm]
snd-ac97-codec 42296 0 [snd-via82xx]
snd-page-alloc 6228 0 [snd-via82xx snd-pcm]
gameport 1644 0 [snd-via82xx]
snd-mpu401-uart 3376 0 [snd-via82xx]
snd-rawmidi 13568 0 [snd-mpu401-uart]
snd-seq-device 4240 0 [snd-seq-oss snd-seq snd-rawmidi]
snd 32644 1 [snd-seq-oss snd-seq-midi-event snd-seq
snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec
snd-mpu401-uart snd-rawmidi snd-seq-device]
uhci 25340 0 (unused)
tun 4224 0 (unused)
8139too 16168 1
mii 2464 0 [8139too]
crc32 2880 0 [8139too]
3c59x 26128 1
nls_cp437 4380 0 (unused)
thermal 6372 0 (unused)
ac 1856 0 (unused)
fan 1664 0 (unused)
processor 8504 0 [thermal]
quickcam 115104 0
usbcore 62092 1 [printer audio uhci quickcam]
videodev 6496 1 [quickcam]
rtc 6824 0 (autoclean)
cat /proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
d000-d0ff : 8139too
d400-d43f : 3Com Corporation 3c900 Combo [Boomerang]
d400-d43f : 00:0b.0
d800-d80f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
dc00-dc1f : VIA Technologies, Inc. USB
dc00-dc1f : usb-uhci
e000-e01f : VIA Technologies, Inc. USB (#2)
e000-e01f : usb-uhci
e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller
e800-e8ff : VIA8233
cat /proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-002a7c2b : Kernel code
002a7c2c-0033c49f : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : nVidia Corporation NV10 [GeForce 256 SDR]
e8000000-e9ffffff : PCI Bus #01
e8000000-e8ffffff : nVidia Corporation NV10 [GeForce 256 SDR]
ea000000-eaffffff : VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
ec000000-ec0000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
ec000000-ec0000ff : 8139too
ffff0000-ffffffff : reserved
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Unex Technology Corp. ND010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: 3Com Corporation 3c900 Combo [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=64]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio Controller (rev 30)
Subsystem: Avance Logic Inc.: Unknown device 4710
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256
SDR] (rev 10) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
--
Cristiano De Michele,
Department of Physics,
University "Federico II" of Naples
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
