When I insert the device, it is detected by the USB system, and shows up in /proc/bus/usb/devices with correct info and serial number. However, in /proc/scsi/scsi, it is listed as:
Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: Generic Model: STORAGE DEVICE Rev: 1.25 Type: Direct-Access ANSI SCSI revision: 02
It is not auto-mounted (I don't suppose it should be in SuSe??). When I run sg_scan -i, it lists devices /dev/sg1 through /dev/sg8 as "Sony USB-FDU", and then hangs. ps shows the "sg_scan" process in state "D" (uninterruptible sleep). There is also another process, "[scsi_eh_2]" in state "DW". Of course, neither process can be killed short of rebooting.
Has anyone else had/solved this problem, or can offer advice??
All recent SuSe patches have been installed, including kernel 2.4.20-4GB.
-- Tom Wainwright
------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
