Hi, access to the memorystick in my Sony Handycam PC110E via USB no longer works with newer kernel.
I had no problems accessing the pictures on the memorystick via USB with RH 9 and a custom kernel 2.4.20-9. I could mount the memorystick as scsi disk and it appeared as /mnt/camera (interestingly the mount point even didn't needed to exist). After upgrading my system to Fedora Core 1, which includes kernel 2.4.22, this does not work any longer: kernel: usb_control/bulk_msg: timeout kernel: usb.c: USB device not accepting new address=2 (error=-110) The same problem occurs with kernel 2.4.23 which I build myself with similar settings as the 2.4.20-9. When I boot my old kernel under Fedora Core 1, mounting of the memorystick does work as before with RH 9. So it must have something to do with the kernel version. Attached are some dmesg messages. Some from 2.4.20-9, where the stick works and the others from 2.4.23 where it fails. Thanks, Manfred 2.4.20-9 ============================================================= kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 kernel: PCI: Using configuration type 1 kernel: PCI: Probing PCI hardware kernel: PCI: Using IRQ router VIA [1106/0686] at 00:07.0 kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19 kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19 kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 17 kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 18 kernel: PCI->APIC IRQ transform: (B0,I13,P0) -> 17 kernel: PCI->APIC IRQ transform: (B0,I14,P0) -> 18 kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16 kernel: PCI: Enabling Via external APIC routing kernel: PCI: Via IRQ fixup for 00:07.3, from 5 to 3 kernel: PCI: Via IRQ fixup for 00:07.2, from 5 to 3 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 kernel: usb.c: registered new driver usbdevfs kernel: usb.c: registered new driver hub kernel: usb-uhci.c: $Revision: 1.275 $ time 23:34:02 Apr 15 2003 kernel: usb-uhci.c: High bandwidth mode enabled kernel: usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 19 kernel: usb-uhci.c: Detected 2 ports kernel: usb.c: new USB bus registered, assigned bus number 1 kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 19 kernel: usb-uhci.c: Detected 2 ports kernel: usb.c: new USB bus registered, assigned bus number 2 kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver kernel: usb.c: registered new driver hiddev kernel: usb.c: registered new driver hid kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> kernel: hid-core.c: USB HID support drivers kernel: hub.c: connect-debounce failed, port 1 disabled kernel: hub.c: new USB device 00:07.2-1, assigned address 2 kernel: usb.c: USB device 2 (vend/prod 0x54c/0x2e) is not claimed by any active driver. kernel: Initializing USB Mass Storage driver... kernel: usb.c: registered new driver usb-storage kernel: scsi1 : SCSI emulation for USB Mass Storage devices kernel: Vendor: Sony Model: Sony DSC Rev: 3.00 kernel: Type: Direct-Access ANSI SCSI revision: 02 kernel: Attached scsi removable disk sde at scsi1, channel 0, id 0, lun 0 kernel: SCSI device sde: 126848 512-byte hdwr sectors (65 MB) kernel: sde: Write Protect is off kernel: sde: sde1 kernel: USB Mass Storage support registered. kernel: usb-uhci.c: interrupt, status 3, frame# 1114 2.4.23 ============================================================= kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 kernel: PCI: Using configuration type 1 kernel: PCI: Probing PCI hardware kernel: PCI: Probing PCI hardware (bus 00) kernel: PCI: Using IRQ router VIA [1106/0686] at 00:07.0 kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19 kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19 kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 17 kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 18 kernel: PCI->APIC IRQ transform: (B0,I13,P0) -> 17 kernel: PCI->APIC IRQ transform: (B0,I14,P0) -> 18 kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16 kernel: PCI: Enabling Via external APIC routing kernel: PCI: Via IRQ fixup for 00:07.3, from 5 to 3 kernel: PCI: Via IRQ fixup for 00:07.2, from 5 to 3 kernel: usb.c: registered new driver usbdevfs kernel: usb.c: registered new driver hub kernel: host/usb-uhci.c: $Revision: 1.275 $ time 01:02:34 Dec 8 2003 kernel: host/usb-uhci.c: High bandwidth mode enabled kernel: host/usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 19 kernel: host/usb-uhci.c: Detected 2 ports kernel: usb.c: new USB bus registered, assigned bus number 1 kernel: Product: USB UHCI Root Hub kernel: SerialNumber: c800 kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: host/usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 19 kernel: host/usb-uhci.c: Detected 2 ports kernel: usb.c: new USB bus registered, assigned bus number 2 kernel: Product: USB UHCI Root Hub kernel: SerialNumber: c400 kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver kernel: Initializing USB Mass Storage driver... kernel: usb.c: registered new driver usb-storage kernel: USB Mass Storage support registered. kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 kernel: hub.c: new USB device 00:07.2-1, assigned address 2 kernel: usb_control/bulk_msg: timeout kernel: usb.c: USB device not accepting new address=2 (error=-110) kernel: hub.c: new USB device 00:07.2-1, assigned address 3 kernel: usb_control/bulk_msg: timeout kernel: usb.c: USB device not accepting new address=3 (error=-110) -- ________________________________________________________________________ Manfred Usselmann [EMAIL PROTECTED] -- Mit freundlichen Gruessen, ________________________________________________________________________ Manfred Usselmann [EMAIL PROTECTED] ICG IT Consulting GmbH Tel. +49/0 69 333 623 Bahnstrasse 7 Fax +49/0 69 306 845 D-65835 Liederbach, Germany Mobil +49/0 171 68 23 750 ________________________________________________________________________ Manfred Usselmann E-Mail [EMAIL PROTECTED] Hundshager Weg 7 Tel. +49/0 6192 90 11 97 D-65719 Hofheim Fax +49/0 6192 90 11 98 Germany Mobil +49/0 171 68 23 750 ________________________________________________________________________ -- Mit freundlichen Gruessen, ________________________________________________________________________ Manfred Usselmann [EMAIL PROTECTED] ICG IT Consulting GmbH Tel. +49/0 69 333 623 Bahnstrasse 7 Fax +49/0 69 306 845 D-65835 Liederbach, Germany Mobil +49/0 171 68 23 750 ________________________________________________________________________ Manfred Usselmann E-Mail [EMAIL PROTECTED] Hundshager Weg 7 Tel. +49/0 6192 90 11 97 D-65719 Hofheim Fax +49/0 6192 90 11 98 Germany Mobil +49/0 171 68 23 750 ________________________________________________________________________ ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
