Thanks for replying.
No, there is no event registered in my log files (debug, dmesg,
kern.log, messages, syslog) when the lan hub is plugged in/pulled out.
--- Begin Message ---
Is there anything in your log files?
On Sat, 17 Jan 2004, brent russell langille wrote:
> I purchased a USB switching LAN hub in order to share my internet
> connection with my second computer. The manufacturer of the hub is a
> company from Korea called "cosy". I didn't think it would be a big issue
> because I bought a USB keypad from them (cosy) and it works fine. The
> hub says that it is compatible with Win 98/SE/ME and Win 2000/XP so I
> figured that it must be using some fairly standard components if it is
> usable all the way back to Win 98.
>
> The problem I am having with the hub is that my system does not even
> recognize that it is plugged into the port. The hub has an power led
> which does light up when it is plugged in but /proc/bus/usb/devices only
> shows the USB host controller (UHCI).
>
> I am running a 2.6.0 kernel with the USB system compiled as modules on
> an IBM ThinkPad 770.
>
> Any help on what direction to take (or if my situation is hopeless)
> would be appreciated
>
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
--- End Message ---
