Hi Michael, > >> You mean the 12 hours between first and second messages? > > > > 12 Hour Jump in time. There was not 12 Hours between first and second > > message.
sounds bad, but I have no idea what is causing it. > >>> Jan 28 00:27:22 gateway kernel: usb-uhci.c: uhci_submit_urb: > >>> pipesize for pipe c0038380 is zero > >> > >> I think this means that there is the wrong altsetting on interface 1 > >> (packets are sent to interface one which needs to have altsetting 1. > >> The message you get is consistent with altsetting 0). Try running > >> pppoa3 with the the following option: -e 1 > > > > I dont see this option in the man page for pppoa3.. What does it do? It causes (as a side-effect) pppoa3 to setup the modem's state more completely. I'm a bit surprised it didn't help. Please search for -e in pppoa3's source to see if the version you are using supports it. By the way, the real purpose of -e is to allow you to control the size of the chunks in which packets are sent to modem. If you put -e 0 (which is what you get when the modem is reset) then the chunk size is effectively zero (and you get a "pipesize for pipe c0038380 is zero" message). > >> Does it help? > > > > Will let you know. Thanks. > > No. Try asking on the mailing list (see http://speedtouch.sf.net). Ciao, Duncan. ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
