Duncan Sands wrote: > Hi Michael, > >>>> You mean the 12 hours between first and second messages? >>> >>> 12 Hour Jump in time. There was not 12 Hours between first and >>> second message. > > sounds bad, but I have no idea what is causing it. >
This problem still has only been found on one machine, (maybe unrelated problem) >>>>> Jan 28 00:27:22 gateway kernel: usb-uhci.c: uhci_submit_urb: >>>>> pipesize for pipe c0038380 is zero >>>> >>>> I think this means that there is the wrong altsetting on interface >>>> 1 (packets are sent to interface one which needs to have >>>> altsetting 1. The message you get is consistent with altsetting >>>> 0). Try running pppoa3 with the the following option: -e 1 >>> >>> I dont see this option in the man page for pppoa3.. What does it >>> do? > > It causes (as a side-effect) pppoa3 to setup the modem's state more > completely. > I'm a bit surprised it didn't help. Please search for -e in pppoa3's > source to see if the version you are using supports it. By the way, > the real purpose of -e is to allow you to control the size of the > chunks in which packets are sent to modem. > If you put -e 0 (which is what you get when the modem is reset) then > the chunk > size is effectively zero (and you get a "pipesize for pipe c0038380 > is zero" message). > >>>> Does it help? >>> >>> Will let you know. Thanks. >> >> No. I seems to be working now. 3x machines have been up for 3 days constantly now. I found that the speedtouch service was being started on runlevels 2345, changed runlevels to 345. Seems to help. Machines are also running the -e 1 option for pppoa3 > > Try asking on the mailing list (see http://speedtouch.sf.net). > > Ciao, > > Duncan. Many thanks for your help. Michael Watson MBW Computing ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
