Il mar, 2004-03-16 alle 11:42, Ged Haywood ha scritto: > You're in just-barely-charted territory. Please read the FAQ, and > post the information requested. You might try earlier 2.6 kernels and > a 2.4 kernel or two before getting back to us, to save time. Our time. :)
Kernel 2.4.18 with module usb-ohci works the same as 2.6.3: system stalls, and comes back to life if I unplug the pcmcia. (Note: I left vgrabbj try accessing the usb webcam for 5 minutes. Right now the card is like a grill, I can make an egg on it!) I've tried opening the console on tail -f /var/log/dmesg when launching vgrabbj but nothing appears. It happens SOME RARE times that the program CAN read image from the device. Actually while I was continuously trying to plug and remove the card it managed to read an image from the cam and correctly come back to the prompt. And one other time, even if I removed the card while the program was reading, it could grab an image to file! Is there any way so I can understand if it's a hardware / module / pwc(webcam module) problem? Should I try one more 2.4 kernel? Older or newer than 2.4.18? Thanks again! Maxxer ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
