[Linux-usb-users] USB MMC/SD reader/writer supported?

[Jeff]

I just acquired a Digital Concepts model CR-V7-UD Multi-Media/Secure 
Data Card Reader/Writer (Free after rebate) and I am trying to locate 
information on getting it to work with Linux.
I plug it in my USB and usbview reports:

Mass Storage Device
Manufacturer: Alcor Micro
Speed: 12Mb/s (full)
USB Version:  1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 058f
Product Id: 9330
Revision Number:  1.00
Config Number: 1
   Number of Interfaces: 1
   Attributes: 80
   MaxPower Needed:  50mA
   Interface Number: 0
       Name: (none)
       Alternate Number: 0
       Class: 08(stor.)
       Sub Class: 6
       Protocol: 50
       Number of Endpoints: 2
           Endpoint Address: 01
           Direction: out
           Attribute: 2
           Type: Bulk
           Max Packet Size: 64
           Interval: 0ms
           Endpoint Address: 82
           Direction: in
           Attribute: 2
           Type: Bulk
           Max Packet Size: 64
           Interval: 0ms
and a dmesg has this line:
usb.c: USB device 4 (vend/prod 0x58f/0x9330) is not claimed by any 
active driver

What do I need to get it running on a 2.4.22 kernel?

tj
[EMAIL PROTECTED]




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users