I plug in usb devices and nothing shows up. I reboot the system with the
devices attached, nothing shows up. If I modeprobe ov511 nothing. If I
modrobe usb-storage nothing. I am using the standard kernel with -aa5
patchset and supermount-ng. I tried going back to 2.6.5, 2.6.4, and 2.6.3
without the patches, the same problem. USB worked under 2.4.25. Any ideas
and suggestions would be helpful, if more information is needed, please let
me know and I will provide it.

Here is the data.

cat /proc/interrrupts - output

           CPU0       CPU1
  0:  139683637         37    IO-APIC-edge  timer
  1:        510          1    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  3:      94944          1    IO-APIC-edge  serial
  4:        168          1    IO-APIC-edge  serial
  7:          0          0    IO-APIC-edge  parport0
  8:          0          1    IO-APIC-edge  rtc
  9:     466512          0   IO-APIC-level  megaraid
 11:    1163951          1   IO-APIC-level  eth0, eth1, eth2, eth3
 15:      24533          1   IO-APIC-level  aic7xxx, aic7xxx
NMI:  139683139  139683025
LOC:  139689481  139689629
ERR:          0
MIS:          0


lspci - output
00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10)

00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
        Subsystem: OPTi Inc. 82C861
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Interrupt: pin A routed to IRQ 14
        Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]

ls /sys/bus/usb/devices - output
[blank]

ls /sys/bus/usb/drivers - output
hub  usb  usbfs

syslog - output
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
USB Universal Host Controller Interface driver v2.2

linux_ver - output
Linux server 2.6.5-lfs-3 #1 SMP Sat Apr 10 20:25:01 PDT 2004 i686 pentium2
i386 GNU/Linux

Gnu C                  3.3.3
Gnu make               3.80
binutils               2.15.90.0.1.1
util-linux             2.12a
mount                  2.12a
module-init-tools      3.0
e2fsprogs              1.35
PPP                    2.4.2
nfs-utils              1.0.6
Linux C Library        2.3.3
Dynamic linker (ldd)   2.3.3
Linux C++ Library      5.0.5
Procps                 3.2.1
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.2.1
Modules Loaded         uhci_hcd usbcore videodev hfs vfat fat isofs
zlib_inflate floppy ext2 nfsd exportfs lockd sunrpc parport_pc lp parport
ipt_TOS ipt_TCPMSS ipt_state ipt_REJECT ipt_LOG ipt_limit iptable_mangle
iptable_nat ip_conntrack_irc ip_conntrack_ftp ip_conntrack iptable_filter
ip_tables af_packet bonding 8250 serial_core tulip crc32 rtc supermount unix
aic7xxx megaraid sd_mod scsi_mod

Config file is attached

----
Jim Gifford
[EMAIL PROTECTED]

Attachment: kernel.config
Description: Binary data

Reply via email to