I really want to use gtkam (or gphoto2) to access a camera.

But I don't seem to have any USB support.

Here is what I have:

-sh-2.05b# ls -l /proc/bus/usb/
total 0

-sh-2.05b#  uname -a
Linux montecristo.reedmedia.net 2.6.3 #1 SMP Tue Apr 13 14:35:17 PDT 2004
i686 unknown unknown GNU/Linux

-sh-2.05b# mount | grep proc
proc on /proc type proc (rw)
usbdevfs on /proc/bus/usb type usbdevfs (rw)

-sh-2.05b# grep proc /etc/fstab
proc    /proc   proc    defaults        0       0
usbdevfs        /proc/bus/usb   usbdevfs        defaults        0       0

-sh-2.05b# grep -i usb /boot/linux-kernel2.6.3-2.6.3.config | grep -v \#
CONFIG_SND_USB_AUDIO=m
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_AUDIO=m
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y

-sh-2.05b# dmesg | grep -1 -i usb
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
--
libata version 1.00 loaded.
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface
driver v2.1
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
--
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
drivers/usb/core/usb.c: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
drivers/usb/core/usb.c: registered new driver snd-usb-audio

-sh-2.05b# grep usb /proc/devices
180 usb


Please note that I have been reading the "Basic USB Configuration" and
"USB Device Filesystem" sections in the The Linux USB sub-system
document.

Any suggestions on how I can see what USB devices I have?

   Jeremy C. Reed
   http://bsd.reedmedia.net/



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to