Hello, I bought a 9-in-1 memory card reader, but when I put the CF card in the slot, it doesn't show up at all. (It works fine for SD cards and the log shows no errors.) With the reader plugged in, /proc/bus/usb/ devices shows this:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=058f ProdID=9360 Rev= 1.00 S: Manufacturer=Generic S: Product=Mass Storage Device S: SerialNumber=9206051 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms and the SCSI disk appears as: /dev/sda -> scsi/host0/bus0/target0/lun0/disc But nothing changes when I put the CF card in, and when I try to mount /dev/sda it tells me mount: No medium found Is there any special voodoo I need to invoke to get the CF card recognized? -- Stuart Luppescu -=- s-luppescu .at. uchicago.edu University of Chicago -=- CCSR 才文と智奈美の父 -=- Kernel 2.6.5-gentoo "I don't remember debates. I don't think we spent a lot of time debating it. Maybe we did, but I don't remember." George W. Bush July 27, 1999 Referring to whether he had discussions about the Vietnam War while an undergraduate at Yale
signature.asc
Description: This is a digitally signed message part
