Try reading the FAQ at http://www.linux-usb.org.
On Sun, 13 Jun 2004, Stuart Luppescu wrote: > Hello, I bought a 9-in-1 memory card reader, but when I put the CF card > in the slot, it doesn't show up at all. (It works fine for SD cards and > the log shows no errors.) With the reader plugged in, /proc/bus/usb/ > devices shows this: > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=058f ProdID=9360 Rev= 1.00 > S: Manufacturer=Generic > S: Product=Mass Storage Device > S: SerialNumber=9206051 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > and the SCSI disk appears as: > > /dev/sda -> scsi/host0/bus0/target0/lun0/disc > > But nothing changes when I put the CF card in, and when I try to mount > /dev/sda it tells me > mount: No medium found > > Is there any special voodoo I need to invoke to get the CF card > recognized? > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
