Hi people, I have a problem with my pendrive "Easy Comm USB Dual Drive SD". This device comes with 64mb of internal memory plus it can read SD cards.
Its information (from /proc/bus/usb/devices) T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10cc ProdID=1105 Rev= 1.00 S: Manufacturer= S: Product=USB Drive S: SerialNumber=4845030008EA C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=1ms I can mount this device and copy files with any size into it. But if I try to copy big files (say 40mb) from it to my hard disk, the device start to copy, but suddenly stops. The led stop blinking. The I have to restart the computer to use it again. Kernel: 2.6.7 bk20 Mother board: Asus A7V600-X (with VIA Chipset) (glup!) EHCI Build in the kernel UHCI Build as a module MultiLUNS activated I hope you can help me... Thanks!
dmesg_copiando_editado.bz2
Description: BZip2 compressed data
