Try mounting the whole device instead of a partition. On Thu, 29 Jul 2004, Zot O'Connor wrote:
> I just bought a Timex tmx2 mp3/watch/USB File Store > > Linux 2.2.26 (self built) does not seem to see it right. It would on > the same laptop under win xp as a normal usb file device. My old USB > dongle worked, as did others. Base system is Fedora Core1 with recent > > It shows up in the dmesq and messages, but fdisk is freaked out, it sees > 4 whacked partitions... > > I am going to rebuild with more USB debugging, but by all rights windows just saw a > standard file store, with a fat partition. > > Attempts to mount -v vfat did not work. > > > Jul 29 19:07:24 localhost kernel: hub.c: new USB device 00:1d.1-2, assigned address 2 > Jul 29 19:07:24 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices > Jul 29 19:07:24 localhost kernel: Vendor: Timex Model: TMX MP3 System Rev: > 1.01 > Jul 29 19:07:24 localhost kernel: Type: Direct-Access ANSI > SCSI revision: 02 > Jul 29 19:07:24 localhost kernel: Attached scsi removable disk sdb at scsi2, channel > 0, id 0, lun 0 > Jul 29 19:07:25 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:07:25 localhost kernel: Current 00:00: sense key Not Ready > Jul 29 19:07:25 localhost kernel: Additional sense indicates Medium not present > Jul 29 19:07:25 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:07:25 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:07:25 localhost kernel: Current sd00:00: sense key Not Ready > Jul 29 19:07:25 localhost kernel: Additional sense indicates Medium not present > Jul 29 19:07:25 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:07:25 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:07:25 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:07:25 localhost kernel: unable to read partition table > Jul 29 19:07:28 localhost usb.agent[7492]: missing kernel or user mode driver > usb-storage > Jul 29 19:07:28 localhost kernel: SCSI device sdb: 128000 512-byte hdwr sectors (66 > MB) > Jul 29 19:07:28 localhost kernel: sdb: Write Protect is off > Jul 29 19:07:28 localhost kernel: sdb: sdb1 sdb2 sdb3 sdb4 > Jul 29 19:15:01 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:01 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:01 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:01 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:01 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:15:01 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:01 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:01 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:01 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:01 localhost kernel: unable to read partition table > Jul 29 19:15:01 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:01 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:01 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:01 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:01 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:01 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:01 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:01 localhost kernel: unable to read partition table > Jul 29 19:15:01 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:01 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:01 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:01 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:01 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:15:01 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:01 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:02 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: unable to read partition table > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:02 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:02 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:15:02 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:02 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:02 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: unable to read partition table > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:02 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:02 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:15:02 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:02 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:02 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: unable to read partition table > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:02 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:03 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:03 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:03 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:03 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:03 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:03 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:03 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:15:03 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:03 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:03 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:03 localhost kernel: I/O error: dev 08:10, sector 0 > > > Jul 29 19:15:04 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:15:04 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:15:04 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:15:04 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:15:04 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:15:04 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:15:04 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:15:04 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:15:04 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:15:04 localhost kernel: unable to read partition table > > > Jul 29 19:15:38 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:38 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:38 localhost kernel: SCSI device sdb: 128000 512-byte hdwr sectors (66 > MB) > Jul 29 19:15:38 localhost kernel: sdb: Write Protect is off > Jul 29 19:15:38 localhost kernel: sdb: sdb1 sdb2 sdb3 sdb4 > > Jul 29 19:15:41 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:41 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:15:42 localhost devlabel: devlabel service started/restarted > Jul 29 19:16:29 localhost kernel: I/O error: dev 08:11, sector 0 > Jul 29 19:16:29 localhost kernel: I/O error: dev 08:11, sector 64 > Jul 29 19:16:29 localhost kernel: I/O error: dev 08:11, sector 0 > Jul 29 19:16:29 localhost kernel: FAT: unable to read boot sector > Jul 29 19:16:39 localhost kernel: I/O error: dev 08:11, sector 0 > Jul 29 19:16:39 localhost kernel: FAT: unable to read boot sector > Jul 29 19:16:48 localhost kernel: I/O error: dev 08:11, sector 0 > Jul 29 19:16:48 localhost kernel: FAT: unable to read boot sector > > Jul 29 19:17:16 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:17:16 localhost kernel: Device not ready. Make sure there is a disc in > the drive. > Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:17:17 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:17:17 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:17:17 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:17:17 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:17:17 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: unable to read partition table > Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:17:17 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:17:17 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > > Jul 29 19:17:17 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:17:17 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:17:17 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: unable to read partition table > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key > Not Ready > Jul 29 19:17:17 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 19:17:17 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense > key Not Ready > Jul 29 19:17:17 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 19:17:17 localhost kernel: sdb: test WP failed, assume Write Enabled > Jul 29 19:17:17 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: unable to read partition table > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense: > > Jul 29 20:03:39 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices > Jul 29 20:03:39 localhost kernel: Vendor: Timex Model: TMX MP3 System Rev: > 1.01 > Jul 29 20:03:39 localhost kernel: Type: Direct-Access ANSI > SCSI revision: 02 > Jul 29 20:03:39 localhost kernel: Attached scsi removable disk sdb at scsi2, channel > 0, id 0, lun 0 > Jul 29 20:03:39 localhost kernel: sdb: Unit Not Ready, sense: > Jul 29 20:03:39 localhost kernel: Current 00:00: sense key Not Ready > Jul 29 20:03:39 localhost kernel: Additional sense indicates Medium not present > Jul 29 20:03:39 localhost kernel: sdb : READ CAPACITY failed. > Jul 29 20:03:39 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = > 08 > Jul 29 20:03:39 localhost kernel: Current sd00:00: sense key Not Ready > Jul 29 20:03:39 localhost kernel: Additional sense indicates Medium not present > Jul 29 20:03:39 localhost kernel: sdb : block size assumed to be 512 bytes, disk > size 1GB. > Jul 29 20:03:39 localhost kernel: sdb: I/O error: dev 08:10, sector 0 > Jul 29 20:03:39 localhost kernel: I/O error: dev 08:10, sector 0 > Jul 29 20:03:39 localhost kernel: unable to read partition table > Jul 29 20:03:42 localhost usb.agent[7493]: missing kernel or user mode driver > usb-storage > > > Jul 29 20:03:42 localhost kernel: SCSI device sdb: 128000 512-byte hdwr sectors (66 > MB) > Jul 29 20:03:42 localhost kernel: sdb: Write Protect is off > Jul 29 20:03:42 localhost kernel: sdb: sdb1 sdb2 sdb3 sdb4 > > scsi2 : SCSI emulation for USB Mass Storage devices > Vendor: Timex Model: TMX MP3 System Rev: 1.01 > Type: Direct-Access ANSI SCSI revision: 02 > Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 > sdb: Unit Not Ready, sense: > Current 00:00: sense key Not Ready > Additional sense indicates Medium not present > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Current sd00:00: sense key Not Ready > Additional sense indicates Medium not present > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 2 > > SCSI device sdb: 128000 512-byte hdwr sectors (66 MB) > sdb: Write Protect is off > sdb: sdb1 sdb2 sdb3 sdb4 > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > unable to read partition table > I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > sdb: Unit Not Ready, sense: > Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 08 > Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready > sdb : block size assumed to be 512 bytes, disk size 1GB. > sdb: test WP failed, assume Write Enabled > sdb: I/O error: dev 08:10, sector 0 > I/O error: dev 08:10, sector 0 > > > fdisk -l /dev/sdb > > Disk /dev/sdb: 65 MB, 65536000 bytes > 3 heads, 42 sectors/track, 1015 cylinders > Units = cylinders of 126 * 512 = 64512 bytes > > Device Boot Start End Blocks Id System > /dev/sdb1 ? 15237707 19558636 272218546+ 20 Unknown > Partition 1 has different physical/logical beginnings (non-Linux?): > phys=(356, 97, 46) logical=(15237706, 0, 3) > Partition 1 has different physical/logical endings: > phys=(357, 116, 40) logical=(19558635, 0, 41) > Partition 1 does not end on cylinder boundary. > /dev/sdb2 ? 10557018 14834608 269488144 6b Unknown > Partition 2 has different physical/logical beginnings (non-Linux?): > phys=(288, 110, 57) logical=(10557017, 1, 19) > Partition 2 has different physical/logical endings: > phys=(269, 101, 57) logical=(14834607, 0, 8) > Partition 2 does not end on cylinder boundary. > /dev/sdb3 ? 4277694 15375812 699181456 53 OnTrack DM6 Aux3 > Partition 3 has different physical/logical beginnings (non-Linux?): > phys=(345, 32, 19) logical=(4277693, 1, 32) > Partition 3 has different physical/logical endings: > phys=(324, 77, 19) logical=(15375811, 2, 33) > Partition 3 does not end on cylinder boundary. > /dev/sdb4 * 11068474 11068643 10668+ 49 Unknown > Partition 4 has different physical/logical beginnings (non-Linux?): > phys=(87, 1, 0) logical=(11068473, 1, 24) > Partition 4 has different physical/logical endings: > phys=(335, 78, 2) logical=(11068642, 2, 24) > Partition 4 does not end on cylinder boundary. > > Partition table entries are not in disk order > > > cat /proc/bus/usb/devices > T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.04 > S: Manufacturer=Linux 2.4.26swsusp ehci_hcd > S: Product=Intel Corp. 82801EB USB2 > S: SerialNumber=00:1d.7 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > T: Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=07cc ProdID=0301 Rev= 0.05 > S: Manufacturer= Ltd > S: Product=Winter Ver1.3 > S: SerialNumber=588587506841 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=1860 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=1840 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=1820 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=1800 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 > P: Vendor=0d7d ProdID=0221 Rev= 1.00 > S: Manufacturer=TimexTMX > S: Product=MP3 System > S: SerialNumber=07281008015D > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=1ms > > cat /proc/bus/usb/drivers > usbdevfs > hub > 96-111: hiddev > hid > usb-storage > > 2.4.26 Home built kernel > > > > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
