I just bought a Timex tmx2 mp3/watch/USB File Store

Linux 2.2.26 (self built) does not seem to see it right.  It would on
the same laptop under win xp as a normal usb file device.  My old USB
dongle worked, as did others.  Base system is Fedora Core1 with recent

It shows up in the dmesq and messages, but fdisk is freaked out, it sees
4 whacked partitions...

I am going to rebuild with more USB debugging, but by all rights windows just saw a 
standard file store, with a fat partition.

Attempts to mount -v vfat did not work.


Jul 29 19:07:24 localhost kernel: hub.c: new USB device 00:1d.1-2, assigned address 2
Jul 29 19:07:24 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jul 29 19:07:24 localhost kernel:   Vendor: Timex     Model: TMX MP3 System    Rev: 
1.01
Jul 29 19:07:24 localhost kernel:   Type:   Direct-Access                      ANSI 
SCSI revision: 02
Jul 29 19:07:24 localhost kernel: Attached scsi removable disk sdb at scsi2, channel 
0, id 0, lun 0
Jul 29 19:07:25 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:07:25 localhost kernel: Current 00:00: sense key Not Ready
Jul 29 19:07:25 localhost kernel: Additional sense indicates Medium not present
Jul 29 19:07:25 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:07:25 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:07:25 localhost kernel: Current sd00:00: sense key Not Ready
Jul 29 19:07:25 localhost kernel: Additional sense indicates Medium not present
Jul 29 19:07:25 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:07:25 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:07:25 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:07:25 localhost kernel:  unable to read partition table
Jul 29 19:07:28 localhost usb.agent[7492]: missing kernel or user mode driver 
usb-storage
Jul 29 19:07:28 localhost kernel: SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
Jul 29 19:07:28 localhost kernel: sdb: Write Protect is off
Jul 29 19:07:28 localhost kernel:  sdb: sdb1 sdb2 sdb3 sdb4
Jul 29 19:15:01 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:01 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:01 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:01 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:01 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:15:01 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:01 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:01 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:01 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:01 localhost kernel:  unable to read partition table
Jul 29 19:15:01 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:01 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:01 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:01 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:01 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:01 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:01 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:01 localhost kernel:  unable to read partition table
Jul 29 19:15:01 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:01 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:01 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:01 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:01 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:01 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:15:01 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:01 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:02 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  unable to read partition table
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:02 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:02 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:15:02 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:02 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:02 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  unable to read partition table
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:02 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:02 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:02 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:15:02 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:02 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:02 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  unable to read partition table
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:02 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:03 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:03 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:03 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:03 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:03 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:03 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:03 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:15:03 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:03 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:03 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:03 localhost kernel:  I/O error: dev 08:10, sector 0


Jul 29 19:15:04 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:15:04 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:15:04 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:15:04 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:15:04 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:15:04 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:15:04 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:15:04 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:15:04 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:15:04 localhost kernel:  unable to read partition table


Jul 29 19:15:38 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:38 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:38 localhost kernel: SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
Jul 29 19:15:38 localhost kernel: sdb: Write Protect is off
Jul 29 19:15:38 localhost kernel:  sdb: sdb1 sdb2 sdb3 sdb4

Jul 29 19:15:41 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:41 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:15:42 localhost devlabel: devlabel service started/restarted
Jul 29 19:16:29 localhost kernel:  I/O error: dev 08:11, sector 0
Jul 29 19:16:29 localhost kernel:  I/O error: dev 08:11, sector 64
Jul 29 19:16:29 localhost kernel:  I/O error: dev 08:11, sector 0
Jul 29 19:16:29 localhost kernel: FAT: unable to read boot sector
Jul 29 19:16:39 localhost kernel:  I/O error: dev 08:11, sector 0
Jul 29 19:16:39 localhost kernel: FAT: unable to read boot sector
Jul 29 19:16:48 localhost kernel:  I/O error: dev 08:11, sector 0
Jul 29 19:16:48 localhost kernel: FAT: unable to read boot sector

Jul 29 19:17:16 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:17:16 localhost kernel: Device not ready.  Make sure there is a disc in the 
drive.
Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:17:17 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:17:17 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:17:17 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:17:17 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:17:17 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  unable to read partition table
Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:17:17 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:17:17 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 

Jul 29 19:17:17 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:17:17 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:17:17 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  unable to read partition table
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current 00:00: sense key 
Not Ready
Jul 29 19:17:17 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 19:17:17 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 19:17:17 localhost kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key 
Not Ready
Jul 29 19:17:17 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 19:17:17 localhost kernel: sdb: test WP failed, assume Write Enabled
Jul 29 19:17:17 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  unable to read partition table
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 19:17:17 localhost kernel: sdb: Unit Not Ready, sense:

Jul 29 20:03:39 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jul 29 20:03:39 localhost kernel:   Vendor: Timex     Model: TMX MP3 System    Rev: 
1.01
Jul 29 20:03:39 localhost kernel:   Type:   Direct-Access                      ANSI 
SCSI revision: 02
Jul 29 20:03:39 localhost kernel: Attached scsi removable disk sdb at scsi2, channel 
0, id 0, lun 0
Jul 29 20:03:39 localhost kernel: sdb: Unit Not Ready, sense:
Jul 29 20:03:39 localhost kernel: Current 00:00: sense key Not Ready
Jul 29 20:03:39 localhost kernel: Additional sense indicates Medium not present
Jul 29 20:03:39 localhost kernel: sdb : READ CAPACITY failed.
Jul 29 20:03:39 localhost kernel: sdb : status = 1, message = 00, host = 0, driver = 
08 
Jul 29 20:03:39 localhost kernel: Current sd00:00: sense key Not Ready
Jul 29 20:03:39 localhost kernel: Additional sense indicates Medium not present
Jul 29 20:03:39 localhost kernel: sdb : block size assumed to be 512 bytes, disk size 
1GB.  
Jul 29 20:03:39 localhost kernel:  sdb: I/O error: dev 08:10, sector 0
Jul 29 20:03:39 localhost kernel:  I/O error: dev 08:10, sector 0
Jul 29 20:03:39 localhost kernel:  unable to read partition table
Jul 29 20:03:42 localhost usb.agent[7493]: missing kernel or user mode driver 
usb-storage 


Jul 29 20:03:42 localhost kernel: SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
Jul 29 20:03:42 localhost kernel: sdb: Write Protect is off
Jul 29 20:03:42 localhost kernel:  sdb: sdb1 sdb2 sdb3 sdb4

scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: Timex     Model: TMX MP3 System    Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
sdb: Unit Not Ready, sense:
Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sdb : block size assumed to be 512 bytes, disk size 1GB.  
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2

SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
sdb: Write Protect is off
 sdb: sdb1 sdb2 sdb3 sdb4
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
 I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
 I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
 I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
 I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0

sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
 I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
sdb: Unit Not Ready, sense:
Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0


fdisk -l /dev/sdb

Disk /dev/sdb: 65 MB, 65536000 bytes
3 heads, 42 sectors/track, 1015 cylinders
Units = cylinders of 126 * 512 = 64512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sdb1   ?  15237707  19558636 272218546+  20  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(356, 97, 46) logical=(15237706, 0, 3)
Partition 1 has different physical/logical endings:
     phys=(357, 116, 40) logical=(19558635, 0, 41)
Partition 1 does not end on cylinder boundary.
/dev/sdb2   ?  10557018  14834608 269488144   6b  Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(288, 110, 57) logical=(10557017, 1, 19)
Partition 2 has different physical/logical endings:
     phys=(269, 101, 57) logical=(14834607, 0, 8)
Partition 2 does not end on cylinder boundary.
/dev/sdb3   ?   4277694  15375812 699181456   53  OnTrack DM6 Aux3
Partition 3 has different physical/logical beginnings (non-Linux?):
     phys=(345, 32, 19) logical=(4277693, 1, 32)
Partition 3 has different physical/logical endings:
     phys=(324, 77, 19) logical=(15375811, 2, 33)
Partition 3 does not end on cylinder boundary.
/dev/sdb4   *  11068474  11068643     10668+  49  Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
     phys=(87, 1, 0) logical=(11068473, 1, 24)
Partition 4 has different physical/logical endings:
     phys=(335, 78, 2) logical=(11068642, 2, 24)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order


cat /proc/bus/usb/devices 
T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.04
S:  Manufacturer=Linux 2.4.26swsusp ehci_hcd
S:  Product=Intel Corp. 82801EB USB2
S:  SerialNumber=00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
T:  Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07cc ProdID=0301 Rev= 0.05
S:  Manufacturer=        Ltd
S:  Product=Winter Ver1.3   
S:  SerialNumber=588587506841
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=1860
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=1840
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=1820
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=1800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=0d7d ProdID=0221 Rev= 1.00
S:  Manufacturer=TimexTMX    
S:  Product=MP3 System  
S:  SerialNumber=07281008015D
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=1ms

 cat /proc/bus/usb/drivers 
         usbdevfs
         hub
 96-111: hiddev
         hid
         usb-storage 

2.4.26  Home built kernel




-- 
-- 
Zot O'Connor <[EMAIL PROTECTED]>
White Knight Hackers, Inc.



-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to