Hi. I recently bought an ALi usb 2.0 pci card and a usb 2.0 iomega super dvd drive. However, ehci-hcd doesn't appear to be recognizing the device as usb 2.0, while usb does. I'm using fedora core 2 with the 2.6.8-rc2 kernel. Here's the relevant snips from dmesg of what happens when I plug the device in: hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501 hub 1-0:1.0: port 5 not reset yet, waiting 50ms ehci_hcd 0000:02:08.3: port 5 full speed --> companion ehci_hcd 0000:02:08.3: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT ohci_hcd 0000:02:08.2: wakeup ohci_hcd 0000:02:08.2: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ohci_hcd 0000:02:08.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 4-1: new full speed USB device using address 3 usb 4-1: not running at top speed; connect to a high speed hub usb 4-1: new device strings: Mfr=0, Product=1, SerialNumber=2 usb 4-1: default language 0x0409 usb 4-1: Product: 'IOMEGA USB 2.0 DEVICE' usb 4-1: SerialNumber: 00118842400000021425
Here's the output of /proc/bus/usb/devices T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 uhci_hcd S: Product=Intel Corp. 82801BA/BAM USB (Hub #2) S: SerialNumber=0000:00:1f.4 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 uhci_hcd S: Product=Intel Corp. 82801BA/BAM USB (Hub #1) S: SerialNumber=0000:00:1f.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 ohci_hcd S: Product=ALi Corporation USB 1.1 Controller (#3) S: SerialNumber=0000:02:08.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=059b ProdID=0155 Rev= 1.03 S: Product='IOMEGA USB 2.0 DEVICE' S: SerialNumber=00118842400000021425 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 ohci_hcd S: Product=ALi Corporation USB 1.1 Controller (#2) S: SerialNumber=0000:02:08.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 ohci_hcd S: Product=ALi Corporation USB 1.1 Controller S: SerialNumber=0000:02:08.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 ehci_hcd S: Product=ALi Corporation USB 2.0 Controller S: SerialNumber=0000:02:08.3 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms Please cc me on replies. Any suggestions as to how to fix this will be greatly appreciatd. Thanks, Caryn Bullard ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
