On Wed, 15 Sep 2004, Mohammed Sameer wrote: > Hi, > Using the ehci-hcd > This device was working, Suddenly it stopped working, The burning process doesn't > complete, It stops at random points using both cdrecord and cdrdao, I replaced the > hardware with another one, replaced the cable but no use. > It's working fine under windows "nero, I wasn't able to test with cdrecord, I have > no windows experience", So it's not a hardware problem I assume. > However it's working fine if I use the uhci-hcd, But I can't burn at speeds greater > than 4x > > I tried with 2.6.7, 2.6.8, 2.4.27, But it's not working "2.6.7 currently".
Please try using 2.6.9-current. A workaround for Genesys Logic devices was first released in 2.6.9-rc1. > # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 003: ID 05e3:0701 Genesys Logic, Inc. Optical Device > Bus 001 Device 001: ID 0000:0000 > > lsusb is not identifying it correctly, Can this be the problem ? What do you mean, not correctly? What's wrong with the above? Does it disagree with the information in /proc/bus/usb/devices? Does lsusb identify the drive differently under ealier versions of the kernel? Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
