Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdd: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 37
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 13333
powernow: Minimum speed 663 MHz. Maximum speed 1990 MHz.
ACPI wakeup devices:
SBTN AC97 MC97 LAN0
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 184k freed
XFS mounting filesystem hda3
Ending clean XFS mount for filesystem: hda3
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
inserting floppy driver for 2.6.10-rc3-ck1
floppy0: no floppy controllers found
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 10 (level, low) -> IRQ 10
divert: allocating divert_blk for eth0
eth0: VIA Rhine II at 0xf0000100, 00:40:d0:5a:d5:18, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 11, pci mem 0xf0000000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 10, io base 0x1200
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 7 (level, low) -> IRQ 7
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 7
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 7, io base 0x1300
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 7 (level, low) -> IRQ 7
Yenta: CardBus bridge found at 0000:00:09.0 [1734:1054]
usb 1-4: new high speed USB device using ehci_hcd and address 3
Yenta: ISA IRQ mask 0x0000, PCI irq 7
Socket status: 30000020
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2
usb 1-4: USB disconnect, address 3
Loaded prism54 driver, version 1.2
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 7 (level, low) -> IRQ 7
divert: allocating divert_blk for eth1
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: [EMAIL PROTECTED]
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3839 buckets, 30712 max) - 356 bytes per conntrack
usb 1-4: new high speed USB device using ehci_hcd and address 4
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: link down
usb 1-4: khubd timed out on ep0in
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
eth1: resetting device...
eth1: uploading firmware...
eth1: firmware version: 1.0.4.3
eth1: firmware upload complete
eth1: interface reset complete
Vendor: HDS72808 Model: 0PLAT20 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.6
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
parport_pc: Ignoring new-style parameters in presence of obsolete ones
lp: driver loaded but no devices found
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
cfq: depth 4 reached, tagging now on
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
mtrr: 0x90000000,0x2000000 overlaps existing 0x90000000,0x1000000
usb 1-4: USB disconnect, address 4
usb 1-4: new high speed USB device using ehci_hcd and address 5
usb 1-4: 05-wait_for_sys timed out on ep0in
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
Vendor: HDS72808 Model: 0PLAT20 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
usb 1-4: reset high speed USB device using ehci_hcd and address 5
usb 1-4: scsi_eh_1 timed out on ep0out
usb 1-4: failed to restore interface 0 altsetting 0 (error=-110)
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
SCSI error : <1 0 0 0> return code = 0x50000
usb 1-4: USB disconnect, address 5
usb 1-4: new high speed USB device using ehci_hcd and address 6
usb 1-4: device descriptor read/64, error -71
usb 1-4: 05-wait_for_sys timed out on ep0in
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
Vendor: HDS72808 Model: 0PLAT20 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
usb-storage: device scan complete
usb 1-4: reset high speed USB device using ehci_hcd and address 6
usb 1-4: scsi_eh_2 timed out on ep0out
usb 1-4: failed to restore interface 0 altsetting 0 (error=-110)
scsi: Device offlined - not ready after error recovery: host 2 channel 0 id 0 lun 0
SCSI error : <2 0 0 0> return code = 0x50000
usb 1-4: USB disconnect, address 6
usb 1-4: new high speed USB device using ehci_hcd and address 7
usb 1-4: device descriptor read/64, error -71
usb 1-4: 05-wait_for_sys timed out on ep0in
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-4: string descriptor 0 read error: -71
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
Vendor: HDS72808 Model: 0PLAT20 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
usb-storage: device scan complete
usb 1-4: reset high speed USB device using ehci_hcd and address 7
usb 1-4: scsi_eh_3 timed out on ep0out
usb 1-4: failed to restore interface 0 altsetting 0 (error=-110)
scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 0 lun 0
SCSI error : <3 0 0 0> return code = 0x50000
usb 1-4: USB disconnect, address 7
usb 1-4: new high speed USB device using ehci_hcd and address 8
usb 1-4: device descriptor read/64, error -71
usb 1-4: 05-wait_for_sys timed out on ep0in
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
usb 1-4: string descriptor 0 read error: -71
Vendor: HDS72808 Model: 0PLAT20 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
sda: sda1
Attached scsi disk sda at scsi4, channel 0, id 0, lun 0
usb-storage: device scan complete
usb 1-4: reset high speed USB device using ehci_hcd and address 8
usb 1-4: failed to restore interface 0 altsetting 0 (error=-71)
scsi: Device offlined - not ready after error recovery: host 4 channel 0 id 0 lun 0
SCSI error : <4 0 0 0> return code = 0x50000
usb 1-4: USB disconnect, address 8
and kernel is:
Linux tuxor 2.6.10-rc3-ck1 #1 Sat Dec 4 15:26:16 EET 2004 i686 athlon i386 GNU/Linux
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
