Arnab Samanta wrote:
Hi:
I wanted to know if my USB harddisk is supported on linux. I am using
kernel version 2.6.10-1.9FC2 for Fedora Core 2. The usb device is a
Maxtor Personal Storage 3100 80GB. I had made the following addition to
my /etc/fstab file:
/dev/sda1 /mnt/usbhd vfat defaults
1 2
That drive should work fine.
Are you sure that the device is /dev/sda1 ?
What is in the kernel log when you attach the device?
Is it already formatted (as vfat/fat32) ?
But I can't mount the device with the prompt saying: /dev/sda1 is not a
valid block device. The output of my /proc/bus/usb/devices file is as
follows:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-1.9_FC2 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0d49 ProdID=3100 Rev=77.f8
S: Manufacturer=Maxtor Corporation
S: Product=Personal Storage 3100
S: SerialNumber=4100100041070
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
--
~Randy
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
