Stephen,
Thx for quick replay !!!.
Initially (after KnoppMyth boot) usbnet is not listed with lsmod.
I go with SSH, and type:
su
modprobe usbnet
After this, going with lsmod gives:
------------------------
[EMAIL PROTECTED]:/home/mythtv#
lsmod
Module Size Used by
usbnet 25992 0
sg 30880 0
via_ircc 21140 0
irda 121016 1 via_ircc
crc_ccitt 3840 1 irda
ehci_hcd 31112 0
shpchp 91524 0
pci_hotplug 31048 1 shpchp
8250_pnp 10112 0
evdev 9088 0
pcspkr 5324 0
cx8800 27276 0
cx88xx 47904 1 cx8800
ir_common 7300 1 cx88xx
v4l1_compat 14852 1 cx8800
ivtv 808420 2
saa7115 13720 0
msp3400 27576 0
tuner 26536 0
bttv 144336 0
video_buf 18436 3 cx8800,cx88xx,bttv
firmware_class 9728 1 bttv
i2c_algo_bit 10504 3 cx88xx,ivtv,bttv
v4l2_common 6528 2 cx8800,bttv
btcx_risc 5768 3 cx8800,cx88xx,bttv
tveeprom 13336 2 cx88xx,bttv
videodev 9600 4 cx8800,cx88xx,ivtv,bttv
lirc_i2c 9348 1
lirc_dev 14212 1 lirc_i2c
md5 5760 1
ipv6 235808 12
via 38400 3
drm 64408 4 via
autofs4 17284 0
af_packet 18696 2
snd_mixer_oss 18048 0
snd_via82xx 23616 2
snd_ac97_codec 68984 1 snd_via82xx
snd_pcm 79364 3 snd_via82xx,snd_ac97_codec
snd_timer 22532 1 snd_pcm
snd_page_alloc 9348 2 snd_via82xx,snd_pcm
gameport 5632 1 snd_via82xx
snd_mpu401_uart 7936 1 snd_via82xx
snd_rawmidi 21536 1 snd_mpu401_uart
snd_seq_device 8716 1 snd_rawmidi
snd 47460 11
snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9312 1 snd
via_rhine 21892 0
mii 5888 2 usbnet,via_rhine
i2c_viapro 8592 0
i2c_core 20224 9
cx88xx,saa7115,msp3400,tuner,bttv,i2c_algo_bit,tveeprom,lirc_i2c,i2c_viapro
via_agp 9344 1
agpgart 29616 2 drm,via_agp
parport_pc 37444 0
parport 32456 1 parport_pc
8250 23108 1 8250_pnp
serial_core 19840 1 8250
ohci1394 31748 0
pcmcia 20624 0
yenta_socket 20616 0
rsrc_nonstatic 10496 1 yenta_socket
pcmcia_core 42656 3 pcmcia,yenta_socket,rsrc_nonstatic
video 16260 0
thermal 12936 0
processor 22504 1 thermal
fan 5252 0
container 5248 0
button 7056 0
battery 10372 0
ac 5508 0
rtc 11980 0
ieee1394 301752 1 ohci1394
-------------------------------------------------------
Here are entries from end of syslog after modprobe & connecting adapter:
-------------------------------------------------------
Oct 16 10:08:59 mythtv dhcpd: from the dynamic address pool for
192.168.1.0/24
Oct 16 10:08:59 mythtv dhcpd: DHCPREQUEST for 192.168.1.128 from
00:40:63:db:94:56 via eth0
Oct 16 10:08:59 mythtv dhcpd: DHCPACK on 192.168.1.128 to
00:40:63:db:94:56 via eth0
Oct 16 10:11:15 mythtv kernel: usbcore: registered new driver
usbnet
Oct 16 10:12:34 mythtv kernel: usb 4-4: new high speed USB device using
ehci_hcd and address 2
Oct 16 10:13:59 mythtv dhcpd: Dynamic and static leases present for
192.168.1.128.
Oct 16 10:13:59 mythtv dhcpd: Remove host declaration MythFront or
remove 192.168.1.128
Oct 16 10:13:59 mythtv dhcpd: from the dynamic address pool for
192.168.1.0/24
Oct 16 10:13:59 mythtv dhcpd: DHCPREQUEST for 192.168.1.128 from
00:40:63:db:94:56 via eth0
Oct 16 10:13:59 mythtv dhcpd: DHCPACK on 192.168.1.128 to
00:40:63:db:94:56 via eth0
------------------------------------------------------
(At 10:11:15 modprobe was issued,
At 10:12:34 I connected adapter to USB)
Here is output from /proc/bus/usb/devices
------------------------------------------------------
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=
6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso=
0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs=
1
P: Vendor=0000 ProdID=0000 Rev=
2.06
S: Manufacturer=Linux 2.6.11.9-chw-2
ehci_hcd
S: Product=VIA Technologies, Inc. USB
2.0
S:
SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=
0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2
Ivl=256ms
T: Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh=
0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=ff MxPS=64 #Cfgs=
1
P: Vendor=9710 ProdID=7830 Rev=
1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0
MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff
Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512
Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512
Ivl=31875us
E: Ad=83(I) Atr=03(Int.) MxPS= 16
Ivl=125us
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=
2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso=
0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs=
1
P: Vendor=0000 ProdID=0000 Rev=
2.06
S: Manufacturer=Linux 2.6.11.9-chw-2
uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#3)
S:
SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=
0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2
Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=
2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso=
0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs=
1
P: Vendor=0000 ProdID=0000 Rev=
2.06
S: Manufacturer=Linux 2.6.11.9-chw-2
uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
S:
SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=
0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2
Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=
2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso=
0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs=
1
P: Vendor=0000 ProdID=0000 Rev=
2.06
S: Manufacturer=Linux 2.6.11.9-chw-2
uhci_hcd
S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
S:
SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=
0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2
Ivl=255ms
---------------------------------------------------------
Here is output from ifconfig:
------------------------------------------------------
[EMAIL PROTECTED]:/home/mythtv# ifconfig
eth0 Link encap:Ethernet HWaddr 00:40:63:D6:54:9A
inet addr:192.168.1.252 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:63ff:fed6:549a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:900236 errors:0 dropped:0 overruns:0 frame:0
TX packets:1522658 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:62677810 (59.7 MiB) TX bytes:2247898419 (2.0 GiB)
Interrupt:11 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:313 errors:0 dropped:0 overruns:0 frame:0
TX packets:313 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:172031 (167.9 KiB) TX bytes:172031 (167.9 KiB)
-----------------------------------------------------
Stephen J. Gowdy wrote:
Does the usbnet driver get loaded? (lsmod will tell you). What is the
actual output in your log files? What is in /proc/bus/usb/devices? Have a
look through the FAQ and User Guide at http://www.linux-usb.org.
On Sat, 15 Oct 2005, Warpme wrote:
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
