That means usbnet doesn't think it can drive that device as it hasn't bound to it. However, what is strange is there are other messages I'd expect to see in your log that aren't there (like no driver for device message).
BTW, your mailer seems to have screwed up the format of the /proc/bus/usb/devices. On Sun, 16 Oct 2005, Warpme wrote: > Stephen, > > Thx for quick replay !!!. > > Initially (after KnoppMyth boot) usbnet is not listed with lsmod. > I go with SSH, and type: > > su > modprobe usbnet > > After this, going with lsmod gives: > ------------------------ > [EMAIL PROTECTED]:/home/mythtv# > lsmod > Module Size Used by > usbnet 25992 0 > sg 30880 0 > via_ircc 21140 0 > irda 121016 1 via_ircc > crc_ccitt 3840 1 irda > ehci_hcd 31112 0 > shpchp 91524 0 > pci_hotplug 31048 1 shpchp > 8250_pnp 10112 0 > evdev 9088 0 > pcspkr 5324 0 > cx8800 27276 0 > cx88xx 47904 1 cx8800 > ir_common 7300 1 cx88xx > v4l1_compat 14852 1 cx8800 > ivtv 808420 2 > saa7115 13720 0 > msp3400 27576 0 > tuner 26536 0 > bttv 144336 0 > video_buf 18436 3 cx8800,cx88xx,bttv > firmware_class 9728 1 bttv > i2c_algo_bit 10504 3 cx88xx,ivtv,bttv > v4l2_common 6528 2 cx8800,bttv > btcx_risc 5768 3 cx8800,cx88xx,bttv > tveeprom 13336 2 cx88xx,bttv > videodev 9600 4 cx8800,cx88xx,ivtv,bttv > lirc_i2c 9348 1 > lirc_dev 14212 1 lirc_i2c > md5 5760 1 > ipv6 235808 12 > via 38400 3 > drm 64408 4 via > autofs4 17284 0 > af_packet 18696 2 > snd_mixer_oss 18048 0 > snd_via82xx 23616 2 > snd_ac97_codec 68984 1 snd_via82xx > snd_pcm 79364 3 snd_via82xx,snd_ac97_codec > snd_timer 22532 1 snd_pcm > snd_page_alloc 9348 2 snd_via82xx,snd_pcm > gameport 5632 1 snd_via82xx > snd_mpu401_uart 7936 1 snd_via82xx > snd_rawmidi 21536 1 snd_mpu401_uart > snd_seq_device 8716 1 snd_rawmidi > snd 47460 11 > snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > soundcore 9312 1 snd > via_rhine 21892 0 > mii 5888 2 usbnet,via_rhine > i2c_viapro 8592 0 > i2c_core 20224 9 > cx88xx,saa7115,msp3400,tuner,bttv,i2c_algo_bit,tveeprom,lirc_i2c,i2c_viapro > via_agp 9344 1 > agpgart 29616 2 drm,via_agp > parport_pc 37444 0 > parport 32456 1 parport_pc > 8250 23108 1 8250_pnp > serial_core 19840 1 8250 > ohci1394 31748 0 > pcmcia 20624 0 > yenta_socket 20616 0 > rsrc_nonstatic 10496 1 yenta_socket > pcmcia_core 42656 3 pcmcia,yenta_socket,rsrc_nonstatic > video 16260 0 > thermal 12936 0 > processor 22504 1 thermal > fan 5252 0 > container 5248 0 > button 7056 0 > battery 10372 0 > ac 5508 0 > rtc 11980 0 > ieee1394 301752 1 ohci1394 > ------------------------------------------------------- > > Here are entries from end of syslog after modprobe & connecting adapter: > ------------------------------------------------------- > Oct 16 10:08:59 mythtv dhcpd: from the dynamic address pool for > 192.168.1.0/24 > Oct 16 10:08:59 mythtv dhcpd: DHCPREQUEST for 192.168.1.128 from > 00:40:63:db:94:56 via eth0 > Oct 16 10:08:59 mythtv dhcpd: DHCPACK on 192.168.1.128 to > 00:40:63:db:94:56 via eth0 > Oct 16 10:11:15 mythtv kernel: usbcore: registered new driver > usbnet > Oct 16 10:12:34 mythtv kernel: usb 4-4: new high speed USB device using > ehci_hcd and address 2 > Oct 16 10:13:59 mythtv dhcpd: Dynamic and static leases present for > 192.168.1.128. > Oct 16 10:13:59 mythtv dhcpd: Remove host declaration MythFront or > remove 192.168.1.128 > Oct 16 10:13:59 mythtv dhcpd: from the dynamic address pool for > 192.168.1.0/24 > Oct 16 10:13:59 mythtv dhcpd: DHCPREQUEST for 192.168.1.128 from > 00:40:63:db:94:56 via eth0 > Oct 16 10:13:59 mythtv dhcpd: DHCPACK on 192.168.1.128 to > 00:40:63:db:94:56 via eth0 > ------------------------------------------------------ > (At 10:11:15 modprobe was issued, > At 10:12:34 I connected adapter to USB) > > Here is output from /proc/bus/usb/devices > ------------------------------------------------------ > > > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= > 6 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= > 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= > 1 > P: Vendor=0000 ProdID=0000 Rev= > 2.06 > S: Manufacturer=Linux 2.6.11.9-chw-2 > ehci_hcd > S: Product=VIA Technologies, Inc. USB > 2.0 > S: > SerialNumber=0000:00:10.3 > > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= > 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 > Ivl=256ms > > > T: Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= > 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=ff MxPS=64 #Cfgs= > 1 > P: Vendor=9710 ProdID=7830 Rev= > 1.00 > C:* #Ifs= 1 Cfg#= 1 Atr=a0 > MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff > Driver=(none) > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 > Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 > Ivl=31875us > E: Ad=83(I) Atr=03(Int.) MxPS= 16 > Ivl=125us > > > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= > 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= > 1 > P: Vendor=0000 ProdID=0000 Rev= > 2.06 > S: Manufacturer=Linux 2.6.11.9-chw-2 > uhci_hcd > S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller > (#3) > S: > SerialNumber=0000:00:10.2 > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= > 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 > Ivl=255ms > > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= > 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= > 1 > P: Vendor=0000 ProdID=0000 Rev= > 2.06 > S: Manufacturer=Linux 2.6.11.9-chw-2 > uhci_hcd > S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller > (#2) > S: > SerialNumber=0000:00:10.1 > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= > 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 > Ivl=255ms > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= > 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= > 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= > 1 > P: Vendor=0000 ProdID=0000 Rev= > 2.06 > S: Manufacturer=Linux 2.6.11.9-chw-2 > uhci_hcd > S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > S: > SerialNumber=0000:00:10.0 > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= > 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 > Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 > Ivl=255ms > --------------------------------------------------------- > > > > Here is output from ifconfig: > ------------------------------------------------------ > [EMAIL PROTECTED]:/home/mythtv# ifconfig > eth0 Link encap:Ethernet HWaddr 00:40:63:D6:54:9A > inet addr:192.168.1.252 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::240:63ff:fed6:549a/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:900236 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1522658 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:62677810 (59.7 MiB) TX bytes:2247898419 (2.0 GiB) > Interrupt:11 Base address:0x8000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:313 errors:0 dropped:0 overruns:0 frame:0 > TX packets:313 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:172031 (167.9 KiB) TX bytes:172031 (167.9 KiB) > ----------------------------------------------------- > > > > Stephen J. Gowdy wrote: > > Does the usbnet driver get loaded? (lsmod will tell you). What is the > > actual output in your log files? What is in /proc/bus/usb/devices? Have a > > look through the FAQ and User Guide at http://www.linux-usb.org. > > > > On Sat, 15 Oct 2005, Warpme wrote: > > > > > >> > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
