Hi, I have a Dynex DX-UC202 Cardbus 2 port USB 2.0 Adapter - P/N L-312CB
It's not working properly on my Apple G3 Wallstreet PowerPC running
2.6.15.5.
When I plug in a USB device like a USB Flash Drive or a USB mouse, all lsusb
reports is...
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Cardbus Ethernet cards work correctly.
Any advice to get this to work?.
Thanks,
Eddie
=== uname -a
Linux wallstreet 2.6.15.5 #9 Tue May 9 14:36:22 EDT 2006 ppc unknown unknown
GNU/Linux
=== lspci
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
00:0d.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
00:11.0 Display controller: ATI Technologies Inc 3D Rage LT Pro (rev dc)
00:13.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:13.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
05:00.0 USB Controller: NEC Corporation USB (rev 43)
05:00.1 USB Controller: NEC Corporation USB (rev 43)
05:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
=== lspci -v
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
Flags: bus master, fast devsel, latency 0
00:0d.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 27
Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at f3000000 (32-bit, non-prefetchable) [size=512K]
00:11.0 Display controller: ATI Technologies Inc 3D Rage LT Pro (rev dc)
Flags: bus master, stepping, medium devsel, latency 32, IRQ 24
Memory at 82000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at fe000400 [size=256]
Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
00:13.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Flags: bus master, medium devsel, latency 168, IRQ 22
Memory at 81803000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 80400000-807ff000 (prefetchable)
Memory window 1: 80800000-80bff000
I/O window 0: 00001000-000011ff
I/O window 1: 00001400-000015ff
16-bit legacy interface ports at 0001
00:13.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Flags: bus master, medium devsel, latency 168, IRQ 23
Memory at 81802000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 92000000-92001000 (prefetchable)
Memory window 1: 80c00000-80fff000
I/O window 0: 00001800-000019ff
I/O window 1: 00001c00-00001dff
16-bit legacy interface ports at 0001
05:00.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Unknown device 1758:0035
Flags: bus master, medium devsel, latency 8, IRQ 23
Memory at 80c00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
05:00.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Unknown device 1758:0035
Flags: bus master, medium devsel, latency 8, IRQ 23
Memory at 80c01000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
05:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
Subsystem: Unknown device 1758:2001
Flags: bus master, medium devsel, latency 68, IRQ 23
Memory at 80c02000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
=== lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
=== lsusb -v
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.15.5 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:05:00.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 6400
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 12
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.15.5 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:05:00.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 6400
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.15.5 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:05:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 6400
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
=== cat /proc/bus/usb/devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15.5 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:05:00.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15.5 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:05:00.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15.5 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:05:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
=== dmesg
Total memory = 128MB; using 256kB for hash table (at c0400000)
Linux version 2.6.15.5 ([EMAIL PROTECTED]) (gcc version 3.3.6) #9 Tue May 9
14:36:22 EDT 2006
Found a Gatwick mac-io controller, rev: 1, mapped at 0xfddff000
Found a Heathrow mac-io controller, rev: 1, mapped at 0xfdd7f000
PowerMac motherboard: PowerBook Wallstreet
Found Grackle (MPC106) PCI host bridge at 0x80000000. Firmware bus number:
0->0
L2CR overriden (0xa9118000), backside cache is enabled
PMU driver 2 initialized for PowerBook G3 Series, firmware: 0a
nvram: OF partition at 0x1800
nvram: XP partition at 0x1300
nvram: NR partition at 0x1400
On node 0 totalpages: 32768
DMA zone: 32768 pages, LIFO batch:7
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: root=/dev/hda9 video=atyfb:vmode:14,cmode:32,mclk:63
reserve=0xfd000000,0xffffff
irq: fixed media-bay on second controller (93)
irq: fixed floppy on second controller (83,65)
irq: fixed ide on second controller (78,67)
irq: secondary controller on irq 27
System has 128 possible interrupts
64 interrupts on main controller
PID hash table entries: 1024 (order: 10, 16384 bytes)
GMT Delta read from XPRAM: -240 minutes, DST: on
via_calibrate_decr: ticks per jiffy = 66685 (1000288 ticks)
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 125440k available (2636k kernel code, 1176k data, 184k init, 0k
highmem)
Calibrating delay loop... 465.92 BogoMIPS (lpj=931840)
Mount-cache hash table entries: 512
device-tree: property "l2-cache" name conflicts with node in
/cpus/PowerPC,750
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 2 of device 0000:00:11.0
Registering pmac pic with sysfs...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Thermal assist unit using timers, shrink_timer: 500 jiffies
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: Enabling device 0000:00:11.0 (0086 -> 0087)
atyfb: using auxiliary register aperture
atyfb: 3D RAGE LT PRO (Mach64 LP, PCI) [0x4c50 rev 0xdc]
atyfb: 4M SGRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 63 Mhz MCLK, 100 MHz
XCLK
Console: switching to colour frame buffer device 128x48
atyfb: fb0: ATY Mach64 frame buffer device on PCI
MacOS display is /pci/ATY,RageLTPro
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
pmac_zilog: 0.6 (Benjamin Herrenschmidt <[EMAIL PROTECTED]>)
ttyS0 at MMIO 0xf3013020 (irq = 15) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0xf3013000 (irq = 16) is a Z85c30 ESCC - Infrared port
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pcnet32.c:v1.31c 01.Nov.2005 [EMAIL PROTECTED]
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
MacIO PCI driver attached to Gatwick chipset
MacIO PCI driver attached to Heathrow chipset
eth0: BMAC at 00:05:02:fb:xx:xx
mediabay0: Registered Heathrow media-bay
mediabay0: powering down
mediabay0: switching to 3
mediabay0: powering up
mediabay0: enabling (kind:3)
mediabay0: waiting reset (kind:3)
mediabay0: waiting IDE reset (kind:3)
mediabay0: waiting IDE ready (kind:3)
mediabay0: up before IDE init
mediabay1: Registered Heathrow media-bay
mediabay1: powering down
input: Macintosh mouse button emulation as /class/input/input0
Registered "pmu" backlight controller,level: 15/15
apm_emu: APM Emulation 0.5 initialized.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 13
Probing IDE interface ide0...
hda: FUJITSU MHH2064AT, ATA DISK drive
hda: Enabling MultiWord DMA 2
ide0 at 0xc900e000-0xc900e007,0xc900e160 on irq 13
Registered ide1 for media bay 0
ide1: Found Apple Heathrow ATA controller, bus ID 1 (mediabay), irq 14
Probing IDE interface ide1...
adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ANSI.
input: ADB keyboard as /class/input/input1
input: ADB Powerbook buttons as /class/input/input2
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse as /class/input/input3
adb: finished probe task...
hdc: MATSHITA CR-174, ATAPI CD/DVD-ROM drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xc9014000-0xc9014007,0xc9014160 on irq 14
ide2: Found Apple Heathrow ATA controller, bus ID 4 (mediabay), irq 78
hda: max request size: 128KiB
hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=13424/15/63, (U)DMA
hda: cache flushes not supported
hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9
hdc: ATAPI 20X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k init
Adding 262136k swap on /dev/hda8. Priority:-1 extents:1 across:262136k
Yenta: CardBus bridge found at 0000:00:13.0 [0000:0000]
PCI: Bus 1, cardbus bridge: 0000:00:13.0
IO window: 00001000-000011ff
IO window: 00001400-000015ff
PREFETCH window: 80400000-807fffff
MEM window: 80800000-80bfffff
Yenta: ISA IRQ mask 0x0000, PCI irq 22
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xfcffffff
pcmcia: parent PCI bridge Memory window: 0xfd000000 - 0xfdffffff
Yenta: CardBus bridge found at 0000:00:13.1 [0000:0000]
PCI: Bus 5, cardbus bridge: 0000:00:13.1
IO window: 00001800-000019ff
IO window: 00001c00-00001dff
PREFETCH window: 92000000-92001fff
MEM window: 80c00000-80ffffff
Yenta: ISA IRQ mask 0x0000, PCI irq 23
Socket status: 30000869
pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xfcffffff
pcmcia: parent PCI bridge Memory window: 0xfd000000 - 0xfdffffff
pccard: CardBus card inserted into slot 1
PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
ohci_hcd 0000:05:00.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:05:00.0: irq 23, io mem 0x80c00000
ohci_hcd 0000:05:00.0: resetting from state 'reset', control = 0x0
ohci_hcd 0000:05:00.0: OHCI controller state
ohci_hcd 0000:05:00.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:05:00.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:05:00.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:05:00.0: intrstatus 0x00000004 SF
ohci_hcd 0000:05:00.0: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:05:00.0: hcca frame #001f
ohci_hcd 0000:05:00.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3)
ohci_hcd 0000:05:00.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:05:00.0: roothub.status 00008002 DRWE OCI
ohci_hcd 0000:05:00.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:05:00.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:05:00.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:05:00.0: created debug files
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.15.5 ohci_hcd
usb usb1: SerialNumber: 0000:05:00.0
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 30ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: over-current condition exists
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
PCI: Enabling device 0000:05:00.1 (0000 -> 0002)
ohci_hcd 0000:05:00.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:05:00.1: irq 23, io mem 0x80c01000
ohci_hcd 0000:05:00.1: resetting from state 'reset', control = 0x0
ohci_hcd 0000:05:00.1: OHCI controller state
ohci_hcd 0000:05:00.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:05:00.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:05:00.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:05:00.1: intrstatus 0x00000004 SF
ohci_hcd 0000:05:00.1: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:05:00.1: hcca frame #001f
ohci_hcd 0000:05:00.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2)
ohci_hcd 0000:05:00.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:05:00.1: roothub.status 00008002 DRWE OCI
ohci_hcd 0000:05:00.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:05:00.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:05:00.1: created debug files
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.15.5 ohci_hcd
usb usb2: SerialNumber: 0000:05:00.1
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 30ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: over-current condition exists
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
PCI: Enabling device 0000:05:00.2 (0000 -> 0002)
ehci_hcd 0000:05:00.2: EHCI Host Controller
ehci_hcd 0000:05:00.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
ehci_hcd 0000:05:00.2: reset portroute 1 0 1 0 0
ehci_hcd 0000:05:00.2: reset hcc_params e806 thresh 0 uframes 256/512/1024
park
ehci_hcd 0000:05:00.2: park 0
ehci_hcd 0000:05:00.2: capability 0001 at e8
ehci_hcd 0000:05:00.2: MWI active
ehci_hcd 0000:05:00.2: ...powerdown ports...
drivers/usb/core/inode.c: creating file '003'
ehci_hcd 0000:05:00.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:05:00.2: irq 23, io mem 0x80c02000
ehci_hcd 0000:05:00.2: reset command 080b02 park=3 ithresh=8 period=1024
Reset HALT
ehci_hcd 0000:05:00.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:05:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.15.5 ehci_hcd
usb usb3: SerialNumber: 0000:05:00.2
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: individual port power switching
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Single TT
hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 3-0:1.0: power on to power good time: 20ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: enabling power on all ports
hub 3-0:1.0: state 5 ports 5 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
phy registers:
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
=== cat /proc/interrupts
CPU0
13: 2121 PMAC-PIC Edge ide0
14: 13 PMAC-PIC Edge ide1
18: 94845 PMAC-PIC Edge VIA-PMU
22: 0 PMAC-PIC Level yenta
23: 0 PMAC-PIC Level yenta, ohci_hcd:usb1, ohci_hcd:usb2,
ehci_hcd:usb3
27: 0 PMAC-PIC Level cascade
32: 1974 PMAC-PIC Edge BMAC-txdma
33: 3155 PMAC-PIC Edge BMAC-rxdma
42: 5130 PMAC-PIC Edge BMAC-misc
BAD: 0
=== zcat /proc/config.gz
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15.5
# Tue May 9 14:34:26 2006
#
--- lines snipped
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
