>>>>> "Alan" == Alan Stern <[EMAIL PROTECTED]> writes:

Alan> It looks like your EHCI USB controller isn't working.  Ports 2,
Alan> 3, and 4 are unable to reset, and ports 5 - 8 don't hand off to
Alan> the companions (or else maybe the companions aren't working
Alan> either).

Alan> If you rmmod ehci-hcd, so that the EHCI controller isn't being
Alan> used, do the USB connections then start operating?

Russell> Just tried rmmod ehci-hcd, and no they don't start working.
Russell> I also tried 2.6.18-rc7 which demonstrates indistinguishable
Russell> behavior.

Alan> This could be a BIOS problem (check your settings) or a hardware
Alan> problem on the motherboard.

Turns out, it was a faulty motherboard.  I replaced it today and USB is
now working.

Thanks for your help!


-- 
Russell Senior         ``I have nine fingers; you have ten.''
[EMAIL PROTECTED]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to