I having and issue with usb barcode scanner that acts as a HID
device. It seems to have some timeout issue when it first comes up.
This on Fedora Core 5 (kernel 2.6.17-1.2187_FC5). Some times the
device eventually "connects" and starts working. I've tried several
different devices with the same results and on different machines
with similar results
Any ideas? Is there some way to extend the timeout period?
thanks
- kumar
Here is a dmesg log:
0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie03]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (40 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 161
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD400BB-00JHC0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-ROM DDU1632, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0xa, vid 0x6
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB HUB0 XVRA XVRB XVRC USB0 USB2 AZAD MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 216k freed
Write protecting the kernel read-only data: 705k
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
libata version 1.20 loaded.
sata_nv 0000:00:0e.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level,
low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 209
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 209
ata1: SATA link down (SStatus 0)
scsi0 : sata_nv
ata2: SATA link down (SStatus 0)
scsi1 : sata_nv
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1160130942.193:2): selinux=0 auid=4294967295
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 22 (level,
low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
eth0: forcedeth.c: subsystem: 01565:2501 bound to 0000:00:14.0
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level,
low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 225, io mem 0xfe02f000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level,
low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 233, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [APCJ] -> GSI 23 (level,
low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:10.2 to 64
intel8x0_measure_ac97_clock: measured 54732 usecs
intel8x0: clocking to 46913
usb 1-5: new low speed USB device using ohci_hcd and address 2
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
usb 1-5: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on
usb-0000:00:0b.0-5
usb 1-6: new full speed USB device using ohci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input2
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1
extents:1 across:2031608k
usb 1-6: reset full speed USB device using ohci_hcd and address 3
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 3
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 3
usb 1-6: new full speed USB device using ohci_hcd and address 4
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input3
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
i2c /dev entries driver
usb 1-6: reset full speed USB device using ohci_hcd and address 4
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 4
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 4
usb 1-6: new full speed USB device using ohci_hcd and address 5
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input4
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 5
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 5
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 5
usb 1-6: new full speed USB device using ohci_hcd and address 6
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input5
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
eth0: no IPv6 routers present
usb 1-6: reset full speed USB device using ohci_hcd and address 6
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 6
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 6
usb 1-6: new full speed USB device using ohci_hcd and address 7
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input6
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 7
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 7
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 7
usb 1-6: new full speed USB device using ohci_hcd and address 8
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input7
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 8
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 8
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 8
usb 1-6: new full speed USB device using ohci_hcd and address 9
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input8
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 9
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 9
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 9
usb 1-6: new full speed USB device using ohci_hcd and address 10
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input9
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 10
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 10
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 10
usb 1-6: new full speed USB device using ohci_hcd and address 11
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input10
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 11
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 11
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 11
usb 1-6: new full speed USB device using ohci_hcd and address 12
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input11
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 12
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 12
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 12
usb 1-6: new full speed USB device using ohci_hcd and address 13
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input12
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 13
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 13
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 13
usb 1-6: new full speed USB device using ohci_hcd and address 14
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input13
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 14
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 14
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 14
usb 1-6: new full speed USB device using ohci_hcd and address 15
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input14
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 15
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 15
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 15
usb 1-6: new full speed USB device using ohci_hcd and address 16
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input15
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 16
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 16
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 16
usb 1-6: new full speed USB device using ohci_hcd and address 17
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input16
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 17
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 17
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 17
usb 1-6: new full speed USB device using ohci_hcd and address 18
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input17
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 18
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 18
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 18
usb 1-6: new full speed USB device using ohci_hcd and address 19
usb 1-6: configuration #1 chosen from 1 choice
input: ?Symbol Technologies, Inc, 2002 Symbol Bar Code Scanner as /
class/input/input18
input: USB HID v1.10 Keyboard [?Symbol Technologies, Inc, 2002 Symbol
Bar Code Scanner] on usb-0000:00:0b.0-6
usb 1-6: reset full speed USB device using ohci_hcd and address 19
usb 1-6: device descriptor read/64, error -110
usb 1-6: device descriptor read/64, error -110
usb 1-6: reset full speed USB device using ohci_hcd and address 19
usb 1-6: device descriptor read/64, error -110
usb 1-6: USB disconnect, address 19
usb 1-6: new full speed USB device using ohci_hcd and address 20
usb 1-6: configuration #1 chosen from 1 choice
Here's a dump from lsusb -v:
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.17-1.2187_FC5 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:0b.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xc0 0x56
PortPwrCtrlMask 0xf8 0xb7
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0000
Port 6: 0000.0000
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Bus 001 Device 020: ID 05e0:1200 Symbol Technologies
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05e0 Symbol Technologies
idProduct 0x1200
bcdDevice 0.00
iManufacturer 1 ?Symbol Technologies, Inc, 2002
iProduct 2 Symbol Bar Code Scanner
iSerial 3 S/N:0470278733FD6E4FB1C966EDE27E1F80
Rev:NBRALAABDM:24JUL063
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Bus Powered
bmAttributes 0x80
MaxPower 400mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33 US
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Bus 001 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel
Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc016 M-UV69a Optical Wheel Mouse
bcdDevice 3.40
iManufacturer 1 Logitech
iProduct 2 Optical USB Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.17-1.2187_FC5 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:0b.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xc0 0x56
PortPwrCtrlMask 0xf8 0xb7
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0303 lowspeed power enable connect
Port 6: 0000.0103 power enable connect
Port 7: 0000.0100 power
Port 8: 0000.0100 power
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
