On Tue, 17 Apr 2007, Jim & Stephanie Matthews wrote:
> My ASUS P4S8X motherboard recently failed and after replacing it with an
> MSI PT8, the following errors appear in /var/log/messages when F-Spot
> running in Gnome on SuSE 10.2 attempts to communicate with my camera:
>
> Kernel:
> 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386
> GNU/Linux
>
> Connect:
> kernel: usb 5-2: new full speed USB device using uhci_hcd and address 2
> kernel: usb 5-2: new device found, idVendor=04a9, idProduct=3045
> kernel: usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
> kernel: usb 5-2: Product: PowerShot S100
> kernel: usb 5-2: Manufacturer: Canon Inc.
> kernel: usb 5-2: configuration #1 chosen from 1 choice
>
> F-Spot:
> kernel: usb 5-2: usbfs: usb_submit_urb returned -22
>
> Disconnect:
> kernel: usb 5-2: USB disconnect, address 2
>
>
> All other USB devices (v1 and v2) are working fine - only the camera has
> stopped working and behaves the same on all ports. I tried toggling the
> legacy support option in BIOS as well as the NOAPIC boot flag. Any
> other suggestions? TIA
Try using the most recent 2.6.21-rc kernel. It might make a difference.
If it doesn't, see what "lsusb -v" says about the camera. Also try doing:
echo y >/sys/module/usbcore/parameters/usbfs_snoop
before you run F-Spot and then see what shows up in the dmesg log after
the program fails.
Alan Stern
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
