On 5/8/07, Alan Stern <[EMAIL PROTECTED]> wrote: > On Tue, 8 May 2007, Fredrik Öberg wrote: > > > Dear all, > > I have a external USB2 HDD, attatched to a USB2 PCI card. Copying data > > TO the external HDD is no problem, according to Krusader it runs with > > 5-6 MB/s. However, copying FROM the external HDD causes the HDD to > > disconnect.
[SNIP] > > Any ideas of what I do wrong? > > Sometimes these problems are caused by poor-quality USB data connections. > Try using different USB cables or a different port. > > Do the errors occur immediately when you try to read from the HDD, or does > it work okay for a while first? The HDD works for a while (some seconds), but then stops working. I tried another cable, and it worked a bit better, for some more seconds, but after a while the HDD unmounted again. I also tried the device on another machine and everything worked well there, so there is nothting wrong with the device. I guess there is something wrong with either my mobo or the USB card. I have had USB problems before, but I hoped the were gone after replacing the USB card. Obvious there is still something strange going on.... A new mobo maybe...? Anyway, thanks for your help. /Fredrik ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
