I believe that the default for the rio is /dev/rio500 (or /dev/usb/rio500)
We never were straight on if we're staying with a flat /dev dir or a more
structured one (or are we using devfs for this?)
Bruce
> Before I go add the proper USB device nodes to Debian's MAKEDEV I'd like
> to confirm the naming conventions we want to use. I'll list all the nodes I
> see that need to be created, just to make sure everyone agrees. I'm pulling
> these values from the USB Guide 1.0.6 on SourceForge, and from the driver
> sources.
> node c/b major:minor owner:group permitions
> ----------------------------------------------------------------
> usb/mouse char 10:32 (Mix mode) root:root 0660
> usb/mouse# char 10:32-48 root:root 0660
> mustek char 10:171 root:video? 0660
> usb/js# char 15:0-BITS_PER_LONGroot:root 0660
> usb/ttyACM# char 166:0-31 root:dialout 0660
> usb/usblp# char 180:0-15 root:lp 0660
> usb/scanner# char 180:48-63 root:root 0666
> usb/rio char 180:64 root:audio? 0660
> usb/dc2xx# char 180:80-87 root:video? 0660
> usb/dab# char 180:240-243 root:audio? 0660
> usb/ttyUSB# char 188:0-15 root:dialout? 0660
>
> Did I forgot anything?
> - Nick Lopez
> [EMAIL PROTECTED]
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
Bruce Tenison
[EMAIL PROTECTED]
Public Key available at: http://www.keyserver.net
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
